per
سازمان زمین شناسی و اکتشافات معدنی کشور
فصلنامه علمی علوم زمین
1023-7429
2645-4963
2011-05-22
20
79
3
12
10.22071/gsj.2018.54987
54987
Original Research Paper
تهیه نقشه دگرسانی در محدوده ذخیره مس پورفیری سریدون با استفاده از تلفیق مطالعات طیفی فرو سرخ (بهروش PIMA)، تصاویر ماهواره ای ASTER و تجزیه XRD
Alteration Mapping at Saridoon Porphyry Copper Prospect Using Short Wave Infrared Spectrometry (PIMA), ASTER Satellite Image and XRD
احمد کاظمی مهرنیا
akmehrnia@yahoo.com
1
ایرج رسا
iraj.rasa17@gmail.com
2
سعید علیرضایی
alirezaei@sb.ac.ir
3
هوشنگ اسدی هارونی
hooshang.asadiharoni@uwa.edu.au
4
جلال کرمی
jl.karami@modares.ac.ir
5
گروه زمین شناسی، دانشکده علوم زمین، دانشگاه شهید بهشتی، تهران.
گروه زمین شناسی، دانشکده علوم زمین، دانشگاه شهید بهشتی، تهران.
گروه زمین شناسی، دانشکده علوم زمین، دانشگاه شهید بهشتی، تهران.
گروه اکتشاف معدن، دانشگاه صنعتی اصفهان، اصفهان.
گروه سنجش از دور و GIS، دانشگاه تربیت مدرس، تهران.
چکیده
ذخیره مس پورفیری سریدون در 3 کیلومتری شمال خاور معدن سرچشمه قرار دارد. شناسایی دگرسانیهای منطقه، با استفاده از تجزیه 145 نمونه با دستگاه PIMA و پردازش تصاویر ماهوارهای ASTER صورت گرفت و نتایج با تجزیه 22 نمونه بهروش XRD، مطالعات سنگنگاری و مشاهدات صحرایی کنترل شد. بر اساس مطالعات PIMA در این منطقه، لیتوکپ با مجموعه کانیهای دگرسانی آرژیلیک پیشرفته مشخص میشود. این دگرسانی در ترازهای مکاننگاری بالا و حاشیه نقاط ارتفاعی دیده میشود. با وجود گسترش چشمگیر، شدت دگرسانی متغیر و نشانگر توسعه لکهای و بهاحتمال، فرسایش بخشی از آن است. ویژگیهای طیفی پیروفیلیت بهعنوان مقیاس شدت این دگرسانی مورد استفاده قرار گرفت. دگرسانی فیلیک بیشتر در بخش مرکزی ناحیه دیده میشود. مجموعه کانیهای این دگرسانی در تمام سطوح مکاننگاری حضور دارد و در برخی مناطق تحت تأثیر دگرسانی آرژیلیک پیشرفته قرار گرفته است. گسترش دگرسانی آرژیلیک متوسط در حاشیه دگرسانیهای فیلیک و آرژیلیک پیشرفته است. چنین مجموعهای میتواند مربوط به فرایندهای برونزاد یا سیالهای گرمابی دما پایین باشد. تعیین محدوده دگرسانی پروپیلیتیک با استفاده از تصاویر ماهوارهای و سنگنگاری انجام شد. بررسی نتایج تجزیه نمونههای سنگی PIMA به روش ICP-MS و مقایسه آن با چند سیستم پورفیری (شامل ذخایر دره زار، آبدر و چاه فیروزه) در منطقه شمال باختری کمربند کانسارهای پورفیری کرمان نشان میدهد که گسترش دگرسانی آرژیلیک پیشرفته در سطح، میتواند به این مفهوم باشد که در سیستم پورفیری سریدون فرسایش سنگهای روپوش نسبت به دیگر سیستمهای پورفیری، کمتر بوده است. این مطالعات لزوم بررسی سیستمهای دگرسانی با مقادیر کم مس و مولیبدن و با مجموعه کانیهای دگرسانی آرژیلیک پیشرفته را محرز میکند.
The Saridoon porphyry system is located 3 km northeast of Sarcheshmeh copper mine. Alteration mapping of the area was carried out using PIMA (Portable Infrared Mineral Analyzer) analysis of 145 samples, ASTER satellite images, XRD analysis of 22 samples, field observations and petrographic studies. The lithocap is characterized by an advanced argillic alteration assemblage. The alteration occurs at high topographic levels and on the flanks of the topographic heights. Despite extensive exposures, the alteration varies in intensity and occurs as patches or partially exposed. Pyrophyllite spectral feature is used as a measure of alteration intensity (pyrophyllite abundance).
Phyllic alteration occurs in the central part of the sampled area. This spectrally distinct alteration assemblage occurs at all elevations, and is partially overprinted by advanced argillic alteration. Intermediate argillic alteration occurs on the flanks of advanced argillic and phyllic alterations. The mineral assemblage might have been formed by supergene processes, or alternatively, by low temperature hydrothermal fluids. The PIMA and XRD samples were analyzed by ICP-MS for a number of metals and semi-metals. A comparison of data from Saridoon and those from three other porphyry systems in northwest Kerman belt (Darrehzar, Abdar, and Chah Firuzeh) shows lower contents of Cu and Mo, and higher contents of As, Sb, Pb in Saridoon. The extend alteration systems in Iranian magmatic arc with low frequency of Cu and Mo shall be checked for advanced argillic alteration mineral assemblage using modern spectrometry instrument (e. g. PIMA). This distribution pattern of elements, coupled with the widespread occurrence of advanced argillic alteration at surface, suggests that stripping of overlying rocks at Saridoon was not as deep and effective as in many other porphyry systems in the Kerman belt. These findings suggest that alteration systems with low Cu and Mo contents and mineral assemblages typical of advanced argillic alteration merit closer and deeper inspection.
http://www.gsjournal.ir/article_54987_db538c94b30d3aea062ab0d31e4ec9f8.pdf
پیما
نقشه برداری دگرسانی
دگرسانی آرژیلیک پیشرفته
سیستم پورفیری
سریدون
ایران
per
سازمان زمین شناسی و اکتشافات معدنی کشور
فصلنامه علمی علوم زمین
1023-7429
2645-4963
2011-05-22
20
79
13
20
10.22071/gsj.2011.54988
54988
Original Research Paper
بررسی پایانه باختری سامانه گسل درونه در ناحیه جندق- طالمسی
The Study of Dorouneh Fault System's West Termination in Jandaq-Talmessi Area
مرضیه استرابیآشتیانی
m1981-straby@yahoo.com
1
علی یساقی
yassaghi@modares.ac.ir
2
حمیدرضا جوادی
3
مجید شاهپسندزاده
4
محمدرضا قاسمی
mrghassemi@yahoo.com
5
دانشکده علوم پایه، دانشگاه تربیتمدرس، تهران، ایران. سازمان زمینشناسی و اکتشافات معدنی کشور، تهران، ایران.
دانشکده علوم پایه، دانشگاه تربیتمدرس، تهران، ایران.
سازمان زمینشناسی و اکتشافات معدنی کشور، تهران، ایران.
دانشگاه تحصیلات تکمیلی صنعتی کرمان، کرمان، ایران.
سازمان زمینشناسی و اکتشافات معدنی کشور، تهران، ایران.
سامانه گسل درونه، باسازوکار راستالغز چپبر، در شمال خرد صفحه ایران مرکزی، نقش مهمی در شکلگیری ریختار کنونی فلات ایران داشته است. این گسل، از خاور رودخانه هیرمند در خاک افغانستان با هندسهای خمیده تا منطقه انارک در ایران مرکزی و با طول کل 900 کیلومتر امتداد دارد. شروع شاخهشدگی پایانه باختری گسل درونه در ناحیه جندق است که به صورت چند شاخه گسل موازی هم است. امتداد این سامانه به سمت باختر در شمال معدن طالمسی ازحالت شمال خاور- جنوب باختر به وضعیت شمالی- جنوبی تغییر مییابد. این افشانههای گسلی در مناطق جندق و طالمسی به صورت مجموعهای از گسلهای راستالغز چپبر همراه با مؤلفه شیبلغز عادی هستند که میتوان آنها را به عنوان یک پایانه بادزن پولکی کششی در نظر گرفت. در حالی که با توجه به وارونگی سوی لغزش بر روی گسل درونه، میتوان سازوکار تشکیل این پایانه را در زمان پیش از تغییر سوی حرکت گسل درونه به صورت یک پایانه بادزن پولکی فشاری به شمار آورد.
Dorouneh Fault is located in the north of Central Iran Microplate with left-lateral strike-slip mechanism and plays an important role in the formation of Iran plateau's morphology. Dorouneh fault, with bend geometry and 900 km length, extends from HyrmandRiver in the Afghanistan border to Anarak area in the Central Iran. Dorouneh Fault terminates in the Jandaq area as sub-parallel branches. Towards west, general trend of Dorouneh Fault System changes from northeast-southwest to north-south in the north of Talmessi Mine. Fault branches are observed as left-lateral strike-slip faults with normal dip-slip component in the Jandaq-Talmessi area that is introduced as a trailing extensional imbricate fan. But, considering slip sense inversion along Dorouneh Fault, the main mechanism for formation of western termination before slip sense inversion is a trailing compressional imbricate fan.
http://www.gsjournal.ir/article_54988_e0cd5dfc2e51bc5da89fcbfd59d3356d.pdf
پایانه گسل امتدادلغز
ساختار پولکی
سامانه گسل درونه
جندق- طالمسی
Strike –Slip Fault Termination
Imbricate Fan
Dorouneh Fault System
Jandaq-Talmessi
per
سازمان زمین شناسی و اکتشافات معدنی کشور
فصلنامه علمی علوم زمین
1023-7429
2645-4963
2011-05-22
20
79
21
30
10.22071/gsj.2011.54989
54989
Original Research Paper
مدلسازی سیستم هیدروکربوری پالئوزوییک زیرین در حوضه خلیج فارس
Petroleum System Modeling of Lower Paleozoic in Persian Gulf Basin
ساسان صالحیراد
salehirad@gmail.com
1
شهرام شرکتی
ssherkati@hotmail.com
2
فرید طاعتی کواریوم
3
محمد حسین نوروزی
4
دانشگاه آزاد اسلامی واحد تهران- شمال، تهران، ایران.
مدیریت اکتشاف وزارت نفت، تهران، ایران.
مدیریت اکتشاف وزارت نفت، تهران، ایران.
مدیریت اکتشاف وزارت نفت، تهران، ایران.
در چند دهه اخیر نهشتههای پالئوزوییک در صفحه عربی و خلیجفارس بسیار مورد توجه زمینشناسان نفتی قرار گرفتهاند. بخش عمده نفتها و گازهای تشکیل شده در این ناحیه از سنگ منشأ به سن سیلورین بوده است. در عربستان سعودی این سنگ منشأ با استفاده از نرمافزارهای رایج (مانند PetroMod و Genex) مدلسازی شده و مقدار پختگی این سنگ منشأ در نواحی مختلف بررسی گردیده است. میزان پختگی این سنگ منشأ در خلیجفارس و نواحی جنوب زاگرس به درستی مشخص نیست، بنابراین اطلاعات زمینشناختی حاصل از 3 چاه در خلیجفارس که تنها یکی از آنها تا این شیلهای سیلورین (سرچاهان) حفاری شده بود با استفاده از نرمافزار PetroMod-1D مدلسازی و بررسی شد. با استفاده از نتایج این مدلسازیها و نتایج مدلسازیهای عربستان، مشخص شد که این شیلهای سیلورین از سمت عربستان به سمت ایران از روند پختگی بیشتری برخوردارند که در خلیجفارس این شیلها در پنجره تولید گاز بوده، و بنابراین در بخشهایی از زاگرس حتی پختگی بالا دارند. وجود عوارض پستی و بلندی پیسنگی که از زمان پرکامبرین در صفحه عربی گسترش داشته موجب شده پختگی این شیلها در بلنداهای قدیمی کمتر از نواحی پست و فروافتاده باشد.
The Paleozoic sediments are noteworthy for many of petroleum geologists to research within Arabian Plate during last decades. Significant values of oil and gas was generated from the Silurian source rock in this area. This source rock has been modeled by commercial software's (PetroMod and Genex) in Saudi Arabia and its maturity proportion determined in various locations. Maturity proportion of this source rock was not characterized truly in Persian Gulf and Zagros foreland basin. Here used geological well data of three drilled wells that one's was penetrated to the Silurian shale (Sarchahan Formation) in Persian Gulf to model and used PetroMod-1D software. These well modeling results and the Saudi Arabia results show that the rate of maturity trend for Silurian shale has increased from Saudi Arabia to Iran, so that the shale is in the recognized gas window in Persian Gulf and over-mature in some part of ZagrosBasin. In Arabian Plate basemental lowlands and highlands exist at the Pre-Cambrian time, therefore cause the maturity of this shale in older highlands than the lowlands area.
http://www.gsjournal.ir/article_54989_b504607d671e330044d59a2c660b3361.pdf
پالئوزوییک
مدلسازی
سامانه هیدروکربوری
خلیج فارس
زاگرس
شیل سرچاهان
سیلورین
پختگی سنگ منشأ
هیدروکربور
Paleozoic
Modeling
Petroleum System
Persian Gulf
Zagros
Sarchahan Shale
Silurian
Source Rock Maturity
Hydrocarbon
per
سازمان زمین شناسی و اکتشافات معدنی کشور
فصلنامه علمی علوم زمین
1023-7429
2645-4963
2011-05-22
20
79
31
38
10.22071/gsj.2011.54998
54998
Original Research Paper
مطالعه و بررسی خواص سنجی فسفات منطقه دلیر از دیدگاه فرآوری
Characterization of Daleer Phosphate Rock Properties for Mineral Processing
صابر خوش جوان
saber.khoshjavan@gmail.com
1
بهرام رضایی
2
احمد امینی
3
دانشکده مهندسی معدن، متالورژی و نفت دانشگاه صنعتی امیرکبیر تهران، تهران، ایران
دانشکده مهندسی معدن، متالورژی و نفت دانشگاه صنعتی امیرکبیر تهران، تهران، ایران
سازمان زمینشناسی و اکتشافات معدنی کشور، تهران، ایران
در این پژوهش بررسیهای خواص سنجی از دیدگاه فرآوری بر روی نمونههای فسفات رسوبی منطقه دلیر بررسی شد. بر اساس بررسیهای کانیشناسی کانی فسفاتی موجود در کانسنگ از نوع کانیهای رسوبی و کلوفان (13/28%) است و کلسیت (53/43%)، کوارتز (49/24%) و دولومیت (65/4%) عمده کانیهای باطله هستند. عمدهترین ترکیبات کانسنگ P2O5 (9/11%)، CaO (36/36%)، SiO2 (49/24%) و MgO (01/1%) هستند. پلتهای آپاتیت دارای میانبارهای با ابعاد حدود 70- 15 میکرون کوارتز و کلسیت بوده و میزان این میانبارها نیز قابل توجه است. بافت کانیشناسی نیز بسیار پیچیده است. درجه آزادی بر اساس بررسیهای میکروسکوپی و غرق و شناورسازی حدود 140 میکرون به دست آمد. حدود 2/8% از کل فسفات در بخش نرمهگیری خردایش اتلاف شد. مدت زمان بهینه برای رسیدن به درجه آزادی تقریباً زمان 10 دقیقه و 30 ثانیه حاصل شد. میزان مواد آلی (ارگانیکی) که بر اساس روش حرارتی به دست آمد، حدود (66/1%) است بررسیهای میکروسکوپ الکترونی نیز وجود میانبارها و مواد آلی را نشان داد. اختلاف وزن مخصوص کانی فسفاتی با باطلهها پایین است. با توجه به مسائل بیان شده، پیشبینی میشود که تنها به روش فلوتاسیون بتوان کانی فسفاتی را از کانیهای کربناتی و سیلیکاتی جدا نمود.
In this research, characterization studies of sedimentary phosphate rock from Zanjan Dalir area with respect to processing are investigated. According to mineralogical studies, phosphate ore (Collophane 28.13%), sedimentary mineral and the predominant constituents of the gangues were Calcite (43.53%), Quartz and Dolomite (4.65%). Main composition of phosphate rock were P2O5 (11.9% wt), CaO (36.36% wt), SiO2 (24.49% wt) and MgO (1.01% wt). Microscopic studies showed that apatite pletts had inclusions of Calcite and Quartz (about 15-70 microns). Content of inclusions was considerable. Mineralogy texture is very complicated. Liberation degree determined by grain counting (with optic microscope) and sink and float test methods. From The results of liberation degree studies can be inferred that in dimension about 140 microns about 96% of phosphate particles librated. In desliming step about 8.2% of total phosphate was removed. Optimum grinding time to reaching liberation of phosphate particles was obtained about 10 min and 30 second. Organic material determined by heating method (about 1.66% wt). Scanning electron microscopy studies showed that inclusions and organic materials existed. Specific gravity of phosphate particles and gangues difference was low. Based on the mentioned studies, effective method for processing of phosphate minerals from carbonate and silicate impurities is suggested flotation method.
http://www.gsjournal.ir/article_54998_813453cb3fe295603cdfb901049b0f89.pdf
فسفات
درجهآزادی
میکروسکوپ
فلوتاسیون
غرق و شناورسازی و زمان خردایش
phosphate
Liberation Degree
Microscope
Flotation
Sink and Float and Grinding Time
per
سازمان زمین شناسی و اکتشافات معدنی کشور
فصلنامه علمی علوم زمین
1023-7429
2645-4963
2011-05-22
20
79
47
54
10.22071/gsj.2011.55000
55000
Original Research Paper
دیرینه بومشناسی پالینومورفهای دونین پسین، جنوب باختر دامغان
Palaeoecology of the Late Devonian Palynomorphs, Southwest Damghan
سیدحسین هاشمی
hashemi@saba.tmu.ac.ir
1
مهتاب فهیمی
2
گروه زمینشناسی، دانشکده علوم، دانشگاه تربیت معلم، تهران، ایران.
گروه زمینشناسی، دانشکده علوم، دانشگاه تربیت معلم، تهران، ایران
توالیهای دونین بالایی در اطراف دروار، جنوب باختر دامغان، از تناوب کنگلومرا، کوارتزیت، ماسهسنگ، سیلتستون و شیل همراه با میانلایههایی از نهشتههای کربناتی تشکیل شدهاند که با ناپیوستگی فرسایشی بر روی رسوبات اردوویسین و بهصورت تدریجی زیر سنگهای کربنیفر زیرین (سازند مبارک) قرار دارند. انواع براکیوپودها، تریلوبیتها، گاستروپودها، مرجانها، خارپوستان، و کونودونتها همراه با مجموعه متنوعی از پالینومورفها، بهترتیب فراوانی، شامل اسپورهای بیشتر ترایلت و میکروفیتوپلانکتونهای دریایی (سیست جلبکهای سبز و آکریتارکها) با حفظشدگی خوب در رسوبات سازند جیرود در برش چینهشناسی دروار وجود دارند. افزون بر این، اسکولوکودونتها با تنوع و فراوانی نسبی بسیار کمتر در برخی از نمونههای برش مورد مطالعه دیده میشوند، اما نمونهای از کیتینوزوآها در این رسوبات مشاهده نشده است. بر اساس وجود انواع پالینومورفهای با گسترش چینهشناسی شناخته شده در مقیاس جهانی مانند:Cymatiosphaera perimembrana, Chomotriletes vedugensis, Deltotosoma intonsum, Papulogabata annulata, Tornacia sarjeantii, Unellium lunatum , Unellium piriforme, Retispora lepidophyta, Geminospora lemurata, Retusotriletes rugulatus, Grandispora cornuta, Grandispora sp. cf. G. gracilis، نهشتههای سازند جیرود در مقطع چینهشناسی مورد مطالعه به دونین پسین (فرازنین- فامنین) نسبت داده میشوند. وجود میکروفیتوپلانکتونهای با وزیکل تقریباً دایرهای شکل، دیواره نسبتاً نازک و بدون عناصر تزئیناتی یا با زوائد بهنسبت کوتاه در رسوبات مورد مطالعه نشاندهنده تشکیل نهشتههای یادشده در محیط دریایی کمژرفا و نزدیک به ساحل است. فراوانی نسبیGeminosporalemurata در بیشتر نمونهها، معرف وجود ژیمنوسپرمهای ابتدایی (Progymnosperms)، و یافت شدن نمونههایی از ماکروفسیلهای گیاهی با فراوانی کم و حفظشدگی ضعیف و قابل انتساب به Lepidodendrales، نشاندهنده وجود فرمهایی از پنجه گرگیان (Lycopodophyta) در پوشش گیاهی اطراف محیط تشکیل نهشتههای مورد مطالعه است. نزدیکی اسپورهای موجود در نهشتههای مورد بررسی نیز نشان میدهد که نمونههایی از وابستگان سرخسها (fern allies) از جمله گیاهان متعلق بهEquisetopsida, Lycopodopsida, Rhyniopsida همراه با Progymnospermopsida در پوشش گیاهی یادشده وجود داشتند. فراوانی نسبی Geminospora lemurata که به ژیمنوسپرمهای اولیه نسبت داده شده است، و اسپورهای منتسب به پنجه گرگیان در پالینوفلورای سازند جیرود احتمالاً نشاندهنده فراوانی نسبی بیشتر این گیاهان در ترکیب پوشش گیاهی اطراف محیط تشکیل رسوبات دونین بالایی جنوب باختر دامغان است.
The Upper Devonian sequences in vicinity of Darvar, southwest Damghan comprise alternation of conglomerates, quartzites, sandstones, siltstones, shales, with fossiliferous limestone intercalations unconformably overlying the Ordovician strata and gradually preceding carbonates of the Lower Carboniferous Mobarak Formation. Diverse biota embracing brachiopods, trilobites, fish, gastropods, corals, echinoderms, and conodonts in conjunction with well preserved palynomorphs, in descending order of abundance, of both terrestrial and marine origin occur in the Upper Devonian strata (Geirud Formation) of Darvar, southwest Damghan. Scolecodonts rarely occur in the material studied but no representative of Chitinozoans encountered. Based on the known stratigraphic distribution of taxa such as Cymatiosphaera perimembrana, Chomotriletes vedugensis, Deltotosoma intonsum, Papulogabata annulata, Tornacia sarjeantii, Unellium lunatum, Unellium piriforme, Retispora lepidophyta, Geminospora lemurata, Retusotriletes rugulatus, Grandispora cornuta, Grandispora sp. cf. G. gracilis the Geirud Formation is attributed to the Late Devonian (Frasnian-Famennian). Occurrence, in the material studied, of microphytoplankton cysts with relatively thin eilyma and ±circular, psilate or sculptured vesicle indicates deposition in a shallow, marginal marine depositional setting. Presence of Geminospora lemurata in majority of the samples refers to the occurrence of progymnosperms and that of poorly preserved Lepidodendrales to that of lycopodophytes in contemporaneous land vegetation. Affinity of sporae dispersae in the Geirud palynoflora indicates that fern allies such as Equisetopsida, Lycopodopsida, Rhyniopsida, and Progymnosperms were represented in the land vegetation. Relative abundance of Geminospora lemurata and spores attributed to lycopodophytes imply domination of the land vegetation by lycopodohytes and progymnosperms.
http://www.gsjournal.ir/article_55000_18a24e86bb8a45e8e8f2c74c793f3f1d.pdf
دیرینهبومشناسی
پالینومورفها
ماکروفسیلهای گیاهی
دونین پسین
خاور البرز مرکزی
Palaeoecology
Palynomorphs
Plant megafossils
Late Devonian
East central Alborz
per
سازمان زمین شناسی و اکتشافات معدنی کشور
فصلنامه علمی علوم زمین
1023-7429
2645-4963
2011-05-22
20
79
47
54
10.22071/gsj.2011.55004
55004
Original Research Paper
بررسی محیط فیزیکوشیمیایی در کانسار مس پورفیری سونگون با استفاده از ویژگیهای شیمیایی کانیها (شمال خاور تبریز)
The Survey of Physical-Chemical Environment in Sungun Copper Porphyry Deposit with the Using of Minerals Properties in
the Copper Porphyry Deposits (North East of Tabriz)
مهری محمدیان
1
محمد بومری
boomeri@science.usb.ac.ir
2
علی احمدی
aahmadi@science.usb.ac.ir
3
علی اصغر مریدی فریمانی
aamoridi@science.usb.ac.ir
4
هال داگلاس
5
مهدی جمالی
6
گروه زمینشناسی اقتصادی، دانشکده علوم پایه، دانشگاه سیستان و بلوچستان، زاهدان، ایران.
گروه زمینشناسی اقتصادی، دانشکده علوم پایه، دانشگاه سیستان و بلوچستان، زاهدان، ایران
گروه زمینشناسی اقتصادی، دانشکده علوم پایه، دانشگاه سیستان و بلوچستان، زاهدان، ایران.
گروه زمینشناسی اقتصادی، دانشکده علوم پایه، دانشگاه سیستان و بلوچستان، زاهدان، ایران.
اداره میکرو آنالیز، دانشگاه نیوبرونزویک، فردریکتون، کانادا.
گروه زمینشناسی اقتصادی، دانشکده علوم پایه، دانشگاه سیستان و بلوچستان، زاهدان، ایران.
کانسار مس پورفیری سونگون در130 کیلومتری شمال خاور تبریز، شمال باختر ایران واقع شده است. این کانسار حاوی 796 میلیون تن کانسنگ با عیار متوسط 61/0 درصد وزنی مس، 01/0 درصد مولیبدن، 016/0 گرم در تن طلا، 21/2 گرم در تن نقره، 57/9 گرم در تن بیسموت و رنیم (09/0درصد وزنی مولیبدنیت) است. این پژوهش بهمنظور مطالعه محیط فیزیکوشیمیایی با استفاده از ویژگیهای کانیهای این کانسار انجام شده است. تشکیل این کانسار به فعالیتهای گرمابی مرتبط با یک استوک گرانودیوریتی و چندین دایک دیوریتی-گرانودیوریتی نسبت داده می شود که در گستره زمانی اولیگوسن تا میوسن در سنگهای رسوبی و آتشفشانی کرتاسه و ائوسن نفوذ کردهاند. دگرسانیهای اصلی مشاهده شده در این تودهها از طرف توده به سمت خارج، پتاسیک، فیلیک، آرژیلیک و پروپیلیتیک بودهاند که شاخص کانسارهای مس پورفیری نوع حاشیه قارهای هستند. همزمان با تشکیل زون برونزاد بسیار ضعیف، یک کلاهک آهنی متشکل از اکسیدها و هیدرواکسیدهای آهن، اکسید مس، مس خالص، سولفاتها، کربناتها و فسفاتهای مس در بالاترین بخش کانسار و در امتداد شکستگیها تشکیل شده است. با توجه به نتایج کانیشناسی، در دمای 450 درجه سانتیگراد و فشار 5/0 کیلوبار (شرایط برآوردی تشکیل کانسنگ در زون پتاسیک)، log¦S2از 18- تا 24- و pH میان 5/2 تا 5/7 است. در دمای 350 درجه سانتیگراد و فشار 5/0 کیلوبار (شرایط برآوردی تشکیل کانسنگ در زون فیلیک)، log¦O2 میان 20- تا 33- و log¦S2 میان 6- تا 15- است.
Sungun Porphyry Copper Deposit is located about 130 km to the northeast of Tabriz, northeast Iran. This deposit contains 796 million tons of ore with 0.61% Cu, 0.01% Mo, 0.016 ppm Au, 9.75 ppm Bi and Re (0.09 wt% of molybdenite). This research studies the physico-chemical environment using the chemical properties of minerals of this deposit. This deposit is related to granodiorite-diorite dikes and granodiorite stock that intruded into sedimentary and volcanic rocks of Cretaceous and Eocene. Dominant alterations are potassic, phyllic, argillic and propylitic from center outward which are characteristics of continental margin porphyry copper deposits. Simultaneously with the supergene mineralization, an iron cap of iron oxides, iron hydroxides, copper oxides, sulfates, carbonates and copper phosphates were developed on top of the deposit and along the fractures. In conclusion, based on mineral chemistry, in 450 ºC and 0.5 kb pressure (PT condition of potassic zone), sulfur fugacity and pH is determined to be as: log¦S2=-18 to -24 an pH=2.5 to 7.5. In 350 ºC and 0.5 kb pressure (PT condition of phyllic zone), oxygen and sulfur fugacities are: logƒO2= -20 to -33 and log¦S2=-6 to -15.
http://www.gsjournal.ir/article_55004_a568639838d3dd999e630733dd45fe9b.pdf
سونگون
ایران
پورفیری
مس
Sungun
Iran
Porphyry
copper
per
سازمان زمین شناسی و اکتشافات معدنی کشور
فصلنامه علمی علوم زمین
1023-7429
2645-4963
2011-05-22
20
79
55
60
10.22071/gsj.2018.55006
55006
Original Research Paper
بررسی فعالیت گسل نیشابور در استان خراسان
An Investigation into the Activity of the Neyshabour Fault, Khorasane Province, Iran
مرتضی فتاحی
1
سمیه رستمی مهربان
srmehraban@ut.ac.ir
2
مرتضی طالبیان
morteza100@yahoo.com
3
عباس بحرودی
bahroudi@ut.ac.ir
4
جیمز هالینگورث
5
ریچارد والکر
6
موسسه ژئوفیزیک، دانشگاه تهران، تهران، ایران
موسسه ژئوفیزیک، دانشگاه تهران، تهران، ایران
پژوهشکده علوم زمین، سازمان زمینشناسی و اکتشافات معدنی کشور، تهران، ایران
دانشکده مهندسی معدن، دانشکده فنی مهندسی، دانشگاه تهران، تهران، ایران
دپارتمان علوم زمین، دانشگاه کمبریج، انگلیس
دپارتمان علوم زمین، دانشگاه آکسفورد، انگلیس
نیشابور(باحدود 200000 نفر جمعیت) در جنوب رشتهکوههای بینالود، در شمال خاوری ایران واقع شده است. این شهر دستکم چهار بار توسط زلزلههای تاریخی(در سالهای 1209، 1270، 1389 و 1405 میلادی) تخریب و گاه نابود شده است. در اطراف نیشابور سه گسل فعال وجود دارد: گسل بینالود، گسل شمال نیشابور و گسل نیشابور. گسلهای شمال نیشابور و بینالود در دامنه رشته کوه بینالود، در شمال نیشابور، قرار دارند. گسل نیشابور، در باختر نیشابور، قرار دارد. گسل نیشابور که در 10 کیلومتری جنوب گسل شمال نیشابور قرار دارد، یک گسل راندگی به طول 50 کیلومتر است. در هر انتهای گسل، دو قطعه جوان و راندگی به طول 10 کیلومتر وجود دارد. این گسل نزدیک شهر نیشابور و یک چشمه احتمالی برای زمینلرزههای 1209 و 1405 میلادی است. گسل نیشابور بهعلت داشتن پتانسیل فعالیتهای آتی، خطر لرزهای مهمی برای شهر نیشابور دارد. با توجه به پیشینه لرزهخیزی نیشابور، آگاهی از نرخ لغزش گسل میتواند ما را در برآورد خطر زلزله کمک کند. نرخ لغزش گسل با اندازهگیری میزان و زمان جابهجایی محاسبه شد. جابهجایی توسط مکاننگاری رقومی SRTM اندازهگیری شد. یک نمونه OSL از گراولهای کواترنری بالا آمده قطعه خاوری برداشت و دز معادل (De) با استفاده از روشSAR OSL اندازهگیری شد. با استفاده از نتایج طیفسنج گاما و دیگر اطلاعات شامل رطوبت نمونه و موقعیت مکانی، میزان دز سالانه نیز اندازهگیری شد. با داشتن دز معادل و نرخ دز، سن نمونه محاسبه شد.
Neyshabour (approximately 200,000 pop.) lies on the southern margin of the Binalud mountains in NE Iran. The city has been destroyed four times by major historical earthquakes (in 1209, 1270, 1389 and 1405 A.D.).Three large faults occur in the region. The Binalud and North Neyshabur faults lie at the foot of the Binalud range north of Neyshabour. The Neyshabour fault lies within the valley west of Neyshabour. The Neyshabour fault, which lies 10 km south of the North Neyshabur fault, is 50 km long thrust. At each end of the Neyshabour fault two young, 10 km-long, thrust segments occur. It is close to Neyshabour city; and is a probable source of the 1209 and 1405 earthquakes. It poses a substantial seismic risk to the city because of the potential for future activity. Slip rate is one of the important parameters for seismic hazard assessment which was determined using SRTM for offset measurement and OSL for age calculation. Luminescence was measured through 7 mm Hoya U-340 filters in a Risø (Model TL/OSL-DA-15) automated TL/OSL system. The equivalent dose (De) was obtained using the conventional quartz single aliquot regeneration method (Murray and Wintle, 2000). Twelve aliquots have been processed for the sample, of which only the aliquots were accepted that satisfied the SAR restrictions. De was estimated using analyst program. Age was calculated using a weighted mean De for the sample. The Dose rate was obtained using uranium, thorium and potassium concentrations, which were measured by Micro Nomand portable gamma spectrometer in field. The results are presented in Table 1. Dividing the displacement by the minimum and the maximum ages provided the slip rate to be 0.1-0.2mm/yr.
http://www.gsjournal.ir/article_55006_436dc1ba79302a69e159f3a291bed86a.pdf
سنیابی
لومینسانس نوری
گسل فعال
نرخ لغزش
گسل نیشابور
Dating
Optical Stimulated Luminescence
Active fault
Slip Rate
Neyshabour Fault
per
سازمان زمین شناسی و اکتشافات معدنی کشور
فصلنامه علمی علوم زمین
1023-7429
2645-4963
2011-05-22
20
79
61
66
10.22071/gsj.2018.55009
55009
Original Research Paper
تعیین روابط کاهندگی دامنه امواج لرزهای در ناحیه تهران
Determination of Ground Motion Attenuation Relationship in the Tehran Region
سید خلیل متقی
khalil1024@yahoo.com
1
عبدالرضا قدس
aghods@iasbs.ac.ir
2
حمیدرضا سیاهکوهی
3
دانشگاه تحصیلات تکمیلی در علوم پایه، زنجان، ایران
دانشگاه تحصیلات تکمیلی در علوم پایه، زنجان، ایران
موسسه ژئوفیزیک، دانشگاه تهران، تهران، ایران
تعیین روابط کاهندگی در یک ناحیه و ارائه توابعی برای افت دامنه موج ناشی از غیرکشسان بودن زمین و گسترش هندسی موج در چند دهه گذشته، همواره مورد توجه بوده است. با استفاده از دستگاههای سرعتنگاشت شبکه لرزهنگاری رقومی موسسه ژئوفیزیک دانشگاه تهران، 47 زلزله رویداده در ناحیه تهران با بزرگی محلی بین 2/3 تا 9/3 ، بررسی شد و با استفاده از الگوریتم Robust Lowess نقاط تغییر ضریب گسترش هندسی که ناشی از وجود ناپیوستگیهای سختکره است بهدست آمد. سپس با استفاده از رگرسیون خطی، ضرایب گسترش هندسی و تابع کیفیت موج برشی برای ناحیه تهران ارائه شد. نقاط تغییر این ضرایب برای همخوانی با فرض Hinged Trilinear 10±106 و 10±191 کیلومتر در نظرگرفته شده است. ضرایب گسترش هندسی در1/0±1/1=b1 ، 1/0±4/0-= b2مشاهده و در 5/0=b3لحاظ و تابع کیفیت موج برشی بهصورت محاسبه شد. مقایسهضریبکیفیتبرآوردشدهباروابط تعیینشدهبرایدیگر نقاطلرزهخیز،بیانگرلرزهخیزی زیادمنطقهاست.
Study of ground motion attenuation in Tehran region is a very important aspect of determining a more precise hazard map of the city. For the last 10 years, three short period seismic networks have been operating in the study region by the Institute of Geophysics, University of Tehran (IGUT). We have selected 47 events recorded by IGUT stations during 1996-2004 to estimate attenuation parameters for the study area. The selected events have provided 480 records with good spatial resolution. Only records with signal-to-noise ratio of greater than 4 have been selected. To find the distances at which the nature of geometrical spreading attenuation (R-b) changes significantly, we use a local regression smoothing method called Robust Lowess. It is found that a tri-linear function having hinges at distances about 106±10 and 191±10 km describes the geometric spreading attenuation with distance. Using a tri-linear regression analysis, we found that b1=1.1±0.1, b2=-0.4±0.1, b3=0.5 minimize the average absolute value of the residuals at a frequency of 4 Hz. The remaining attenuation is assumed to be caused by anelasticity. Using anelastic attenuation at different frequencies, the quality factor in Tehran region is obtained as .
http://www.gsjournal.ir/article_55009_e32a2b4f3a0a7558a86b47dac0c66e9b.pdf
روابط کاهندگی
ناکشسانی
پخش هندسی
تابع کیفیت موج برشی
الگوریتم Robust Lowess
منطقه تهران
Attenuation Law
Anelasticity
Geometric Spreading
Quality factor
Robust Lowess Algorithm
Tehran Region
per
سازمان زمین شناسی و اکتشافات معدنی کشور
فصلنامه علمی علوم زمین
1023-7429
2645-4963
2011-05-22
20
79
67
74
10.22071/gsj.2011.55040
55040
Original Research Paper
مطالعات ژئوشیمیایی نهشته های بوکسیتی- کائولینیتی پرمین در شمال سقز، استان کردستان
Geochemical Studies of Permian Bauxite-Kaolin Deposits in North of Saqqez, Kordestan Province
علی عابدینی
abedini2020@yahoo.com
1
علی اصغر کلاگری
calagaria@yahoo.com
2
گروه زمینشناسی، دانشکده علوم، دانشگاه ارومیه، ارومیه، ایران.
گروه زمینشناسی، دانشکده علوم طبیعی، دانشگاه تبریز، تبریز، ایران.
وقفههای رسوبگذاری در مقطع زمانی پرمین در شمال سقز با توسعه عدسیهایی از کانسنگهای بوکسیتی- کائولینیتی در درون سازند کربناتی روته همراه بوده است. در یکی از این عدسیهای ملاحظه شده، 6 واحد سنگشناسی تشخیص داده شده است که بهترتیب از پایین به بالا شامل واحدهای: 1) سرخ قهوهای تیره، 2) بنفش، 3) چند رنگ، 4) صورتی، 5) زرد و 6) سفید (کائولین) هستند. محاسبات شاخص هوازدگی مطلق بر روی این واحدها نشان میدهند که عناصر Si، Na، K، P، Mn، Mg، Ca، Sr، Ba و Lu در طی فرایندهای هوازدگی سنگهای بازالتی شسته و عناصر Th، U، Y، Nb، Hf، Zr، Tb، Dy، Ho، Er، Tm و Yb غنی شدهاند. این در حالی است که عناصر Al، Fe، Ti، Rb، V، Cr، Ni، Co، La، Ce، Pr، Nd، Sm، Eu و Gd در توسعه نیمرخ هوازده متحمل فرایندهای شستشو- تثبیت شدهاند. نتایج بهدست آمده نشان میدهند که فرایندهایی مانند جذب سطحی، روبش و تمرکز بهوسیله اکسیدها و هیدروکسیدهای آهن، پایداری کمپلکسهای حامل فلز، تغییرات در شیمی محلولهای هوازده کننده، حضور مواد آلی، تثبیت در فازهای نوشکل و حضور در فازهای کانیایی مقاوم از جمله عواملی بودهاند که نقش بارزی در توزیع عناصر در این نهشتهها ایفا کردهاند.
Depositional cessations during Permian period in north of Saqqez were associated with development of lenses of bauxite-kaolin ores in Ruteh carbonate formation. In one of these lenses considered, six lithologic units were recognized which are from bottom to the top, (1) dark brown red, (2) violet, (3) multicolor, (4) pink (5) yellow, and (6) white (kaolin). Calculations of absolute weathering index for these units indicate that elements such as Si, Na, K, P, Mn, Mg, Ca, Sr, Ba, and Lu were leached during the weathering processes from basaltic rocks and elements such as Th, U, Y, Nb, Hf, Zr, Tb, Dy, Ho, Er, Tm, and Yb enriched. Whereas, elements such as Al, Fe, Ti, Rb, V, Cr, Ni, Co, La, Ce, Pr, Nd, Sm, Eu, and Gd have born leaching-fixation processes during the development of the weathered profile. The obtained results show that processes such as adsorption, scavenging and concentration by Fe-oxides and hydroxides, stability of metal-carrying complexes, variations in chemistry of weathering solutions, the presence of organic matters, fixation in neomorph phases, and the presence in the resistant mineral phases were the important factors that have played pronounced roles in distribution of elements in these deposits.
http://www.gsjournal.ir/article_55040_0d35ca269703c355b2df13115c88be34.pdf
بوکسیتی شدن
کائولینیتی شدن
شمال سقز
تغییرات جرم
توزیع عناصر
Bauxitization
Kaolinization
North of Saqqez
Mass changes
Distribution of Elements
per
سازمان زمین شناسی و اکتشافات معدنی کشور
فصلنامه علمی علوم زمین
1023-7429
2645-4963
2011-05-22
20
79
75
82
10.22071/gsj.2011.55043
55043
Original Research Paper
شواهد ساختاری ترافشارش قارهای درگستره بیرک (جنوب خاور ایران)
Structural Evidences of Continental Transpression in the Birk Area(SE Iran)
احسان موسوی
moosavi_eh@yahoo.com
1
سازمان زمینشناسی و اکتشافات معدنی کشور، تهران، ایران
تعدادی از شواهد ساختاری ترافشارش قارهای در منطقه بیرک مطالعه و با نتایج مدلسازیهای تجربی مقایسه شدهاند. این شواهد به این شکل هستند که محور چینهاآرایش پلهای و میل دوسویه دارند. جهتیافتگی میانگین محور چینهاو راستای رخهای شکستگی با جهتیافتگی عمومی گسلهای مرزی زوایای کمتر از 45 درجه میسازند. گسلهای راستالغز آرایش همپوشان قلمرو دارند. بُرشهای همسازP فراوانتر از بُرشهای همسازR هستند. صفحات رگههای کششی تخت وگسلهای عادی نسبت به محور چینها با زاویه زیادی قرارگرفتهاند و این وضعیت وجود مقادیری ازکشش موازی لولای چین را پیشنهاد میکند. گسلهای جداکننده راستبر مایل موازی لایهبندی و ساختارهای مرتبط با آنها مثل چینهای فرعی، گرایش راستبر و گسلهای تراکششی و ترافشاری و نیمگل ساختهای بزرگ مقیاس دیگر عوارض ساختاری ترافشارش قارهای دارند. بهنظر میرسد جداشدگی مؤلفه راستالغز در یک دگرریختی ترافشارشی راستالغز چیره ناشی از بازپویایی گسلهای پیسنگی با راستای شمالی- جنوبی در نئوژن پسین بوده است.
Some structural evidences of continental transpression are studied and compared with experimental modeling results in the Birk area. These evidences are: fold axes have a double plunging en-echelon pattern. Fold axes mean orientations and fracture cleavages strike form angles less than 45 degrees with the boundary faults. Strike-slip faults have an en-echelon and domainal pattern. Synthetic P Shears are more abundant than synthetic R shears. Flat tension vein (and normal faults) planes lie at a high-angle with respect to folds axes and this condition proposes some amounts of hinge-parallel extensions. Inclined dextral layer-parallel detachment faults and related structures such as asymmetric dextrally verging minor folds, traspressional and trastensional faults and large-scale half flower structures are other structural features of dextral transpression. It is believed that partitioning of dextral component of wrench-dominated continental transpression is due to reactivation of N-S striking basement faults in late Neogene.
http://www.gsjournal.ir/article_55043_d62f22933e0387d5694d0bdfc5e93190.pdf
ترافشارش
سیستان
بیرک
Transpression
Sistan
Birk
per
سازمان زمین شناسی و اکتشافات معدنی کشور
فصلنامه علمی علوم زمین
1023-7429
2645-4963
2011-05-22
20
79
83
94
10.22071/gsj.2011.55045
55045
Original Research Paper
نانوستراتیگرافی سازندهای سرچشمه و سنگانه در باختر منطقه کپهداغ (برش تکلکوه)
Nannostratigraphy of Sarcheshmeh and Sanganeh Formations, West of Kopet Dagh Basin (Takal Kuh Section)
اعظم ماهانیپور
1
انوشیروان کنی
2
محمد حسین آدابی
rakhshande.abasi@gmail.com
3
سید ناصر رئیسالسادات
4
گروه زمینشناسی، دانشکده علومزمین، دانشگاه شهید بهشتی، تهران، ایران. گروه زمین شناسی، دانشکده علوم، دانشگاه شهید باهنر، کرمان، ایران
گروه زمینشناسی، دانشکده علومزمین، دانشگاه شهید بهشتی، تهران، ایران.
گروه زمینشناسی، دانشکده علومزمین، دانشگاه شهید بهشتی، تهران، ایران.
گروه زمینشناسی، دانشکده علوم، دانشگاه بیرجند، بیرجند، ایران.
در این مطالعه توالی رسوبات کرتاسه زیرین شامل سازندهای سرچشمه و سنگانه در باختر منطقه کپهداغ (برش تکلکوه) از نقطه نظر نانوفسیلهای آهکی مورد بررسی قرار گرفت. در برش مورد مطالعه ستبرای این دو سازند 1668 متر است. بر اساس زیستزونبندی نانوفسیلهای آهکی، زونهای نانوفسیلی NC5، NC6 و NC7 تعیین شده است. بر همین اساس سن سازند سرچشمه بارمین پسین- آپتین پیشین و سن سازند سنگانه انتهای آپتین پیشین- ابتدای آپتین پسین است. اجتماع نانوفسیلهای آهکی موجود در این دو سازند شامل انواعی است که شاخص حوزه تتیس هستند. همچنین در اجتماع نانوفسیلهای آهکی، انواع شاخص آبهای سرد از قبیل Repagulum parvidentatum و .Seribiscutum sp. نادر بوده، درحالیکه انواع شاخص آبهای گرم از قبیل .Rhagodiscus spp و .Nannoconus spp در منطقه به طور چیره حضور دارند.
The Lower Cretaceous sedimentary succession of western Kopet Dagh Basin (Sarcheshmeh and Sanganeh formations) was investigated. Taking into account the considerable thickness of the studied section (1668 m) and the possibility of recording all the important events, determination of calcareous nannofossil biostratigraphy was put on the agenda. This resulted in recognition of NC5, NC6 and NC7A nannofossil zones. Accordingly the age of the Sarcheshmeh Formation within the studied section is determined as Late Barremian- Early Aptian while the age of the Sanganeh Formation is late Early Aptian- early Late Aptian. The calcareous nannofossil assemblage of Sarcheshmeh and Sanganeh Formations has a Tethyan affinity with abundant warm-water varieties such as Rhagodiscus spp. and Nannoconus spp. while the cold-water species like Repagulumparvidentatum and Seribiscutum spp. are rare.
http://www.gsjournal.ir/article_55045_4577f619d6c3bbd2a2f34610a6fc1517.pdf
کپهداغ
سازند سرچشمه
سازند سنگانه
نانوفسیلهای آهکی
بارمین پسین-آپتین
Kopet Dagh
Sarcheshmeh Formation
Sanganeh Formation
Calcareous Nannofossils
Late Barremian- Aptian
per
سازمان زمین شناسی و اکتشافات معدنی کشور
فصلنامه علمی علوم زمین
1023-7429
2645-4963
2011-05-22
20
79
95
100
10.22071/gsj.2011.55048
55048
Original Research Paper
بررسی اعتبار برآوردگرهای کریجینگ خطی و غیرخطی در پهنهبندی بلوکهای کانسنگ و باطله در معدن مس سرچشمه
Validation Study of Linear and Nonlinear Kriging Estimator on Ore-waste Grade Control Process
محمد جلالی
mohammadls2005@gmail.com
1
غلامرضا رحیمیپور
2
محمدرضا دیانتی
3
مجتبی تقوایینژاد
4
گروه مهندسی معدن، دانشکده فنی، دانشگاه شهید باهنر، کرمان، ایران.
گروه مهندسی معدن، دانشکده فنی، دانشگاه شهید باهنر، کرمان، ایران.
واحد کنترل سنگ، مجتمع مس سرچشمه، رفسنجان، ایران
گروه مهندسی معدن، دانشکده فنی، دانشگاه شهید باهنر، کرمان، ایران.
در ارزیابی تناژ و عیار کانسارهای مختلف، اگر مسئله برآورد، محدود به برآورد عیار در یک نقطه باشد، بهطور معمول، برآوردگرهای خطی کریجینگ، نتایج رضایتبخشی ارائه میدهند؛ اما اگر هدف برآورد توزیع احتمال مورد نظر برای کنترل آمیختگی بلوکهای باطله و کانسنگ باشد، حتی استفاده از بهترین برآوردگرهای خطی با پراش کمینه نیز نتایج قابل قبولی بهدست نمیدهد. هدف از پژوهش حاضر، برآورد مرز بهینه کانسنگ و باطله در پله 5/2462 معدن مس سرچشمه بهکمک برآوردگر غیرخطی کریجینگ شاخص و ارزیابی اعتبار برآوردگر خطی کریجینگ معمولی نسبت بهآن است. برای برآورد بلوکی دادهها توسط کریجینگ خطی معمولی بهدلیل پیروی نکردن دادهها از حالت عادی و وجود تابع توزیع دو مدی، ابتدا دادهها بهوسیله نقشههای زمینشناسی و نرمافزار mine sight به دو گروه کانسنگ و باطله تقسیم شدند و سپس با توجه به عادیشدن دادههای کانسنگ از این برآوردگر برای برآورد استفاده شد. نگاه آماری به این دو برآوردگر نشان داد که از مجموع 25629 بلوک برآوردی در فضای مورد نظر، 2905 بلوک، با استفاده از کریجینگ شاخص بهطور صد در صد باطله اعلام شد. در حالیکه برآوردگر خطی کریجینگ معمولی، 2475 بلوک را بهعنوان باطله معرفی کرد. در پایان، استفاده از کریجنگ غیرخطی شاخص بهعنوان بهترین برآوردگر برای جدایش بلوکهای کانسنگ و باطله معرفی شد. بنابراین، پس از جدایش این دو جامعه آماری میتوان با اعتماد بیشتری برآوردگرهای کریجینگ خطی معمولی را برای کنترل عیار کانسنگهای فضای برآوردی به کاربرد برد.
Facing to unsatisfied results in grade-tonnage estimation especially in dynamic programming is always being a great problem in mining revenue operation. If the problem is to estimate a grade point only, linear kriging estimators can show accurate results. But if target is to achieve to probability distribution estimation of a spatial zone for considering ore-waste block mixing control, using linear kriging methods with minimum estimation variance can’t be applied for an appropriate results. Most of probability function is nonlinear, therefore estimation of these function by nonlinear estimator showed an accurate results. Main target of this paper is to achieve to the most exact ore-waste boundaries in 2462.5 benchmark of Sarcheshmeh copper mine using indicator kriging (IK) as nonlinear estimator and comparing with ordinary kriging (OK) as linear estimator to evaluate validity of linear estimator. Because of OK dependency to normal distribution data for a given minimum estimation variance, utility data have been separated to ore and waste group using geological map and mine-sight. After this separation ore groups was approached to normal distribution and OK estimator can be applied for estimation. 25629 blocks were estimated by these two kinds of estimators. IK estimator classified 2905 blocks of total blocks as waste blocks, but OK estimator showed 2475 blocks as waste block. Finally IK estimator recommended as best estimator for ore and waste block separation and after this process using ordinary kriging estimator almost gave more confident estimation in ore blocks grade control process.
http://www.gsjournal.ir/article_55048_357114f2df6f97bd97feba34dc5edc35.pdf
کنترل عیار
کریجینگ شاخص
کریجینگ معمولی
واریوگرام شاخص
منحنی تناژ- عیار
Grade Control
indicator kriging
Ordinary Kriging
Indicator Variogram
Grade – Tonnage Curve
per
سازمان زمین شناسی و اکتشافات معدنی کشور
فصلنامه علمی علوم زمین
1023-7429
2645-4963
2011-05-22
20
79
101
112
10.22071/gsj.2011.55051
55051
Original Research Paper
ژئوشیمی عناصر اصلی نهشته های سیلیسی آواری سازند شیرگشت، بلوک کلمرد، ایران مرکزی برای تعیین برخاستگاه زمینساختی و هوازدگی سنگ منشأ
Geochemistry of Major Elements of Silisiclastic Deposites from Shirgesht Formation, in Kalmard Block, Centeral Iran, Implications for Provenance, Tectonic Setting,and Weathering Intensity
آرام بایت گل
aram1361@gmail.com
1
محبوبه حسینی برزی
m_hosseini@sbu.ac.ir
2
گروه زمین شناسی، دانشکده علوم زمین، دانشگاه شهید بهشتی، تهران، ایران
دانشکده علوم زمین، دانشگاه شهید بهشتی، تهران، ایران.
تجزیه و تحلیل ژئوشیمیایی عناصر اصلی 12 نمونه از ماسهسنگها و شیلهای سازند شیرگشت در دو مقطع کوه عاشقان و کوه راهدار به سن اردوویسین واقع شده در بلوک کلمرد، ایرانمرکزی و رسم دادهها بر روی نمودارهای تقسیمبندی سنگهای آواری ترکیب آنها را کوارتزآرنایت و شیل نشان میدهد. همچنین، استفاده از نمودارهای تفکیکی، دوتایی و مثلثی، برخاستگاه کراتون و چرخه دوباره و جایگاه زمینساختی حاشیه غیرفعال قارهای را برای این نهشتهها تداعی مینماید. دادههای یادشده پیشنهاد کننده سنگ مادر رسوبی کوارتزی برای ماسهسنگها و سنگ آذرین متوسط تا اسیدی برای شیلها است. افزون برآن، تعیین اثر هوازدگی در ناحیه منشأ با استفاده از اندیس CIA، میزان هوازدگی این نهشتهها را در منطقه منشأ شدید معرفی میکند. این موضوع میتواند به وسیله آب و هوای گرم و مرطوب در ناحیه منشأ از حاشیه قارهای غیرفعال شرح داده شود.
Geochemical analysis of major elements from 12 sampels from Shirgesht Formation sandstones and shales with Ordovicien age in sections of kuh-Asheghan and Kuh-Rahdar at Kalmard block in Central Iran zone, and plotting these data on silisiclastic rocks classification diagrams, show that they are quartzarenite and shale. Moreover, the use of discrimination, biplot triangular diagrams determined the quartzose recycled provenance (craton and recycled orogen) and passive margin tectonic setting for these deposites. These data suggest the quartzose sedimentary provenace for sandstones and intermediate to felsic ignious provenance for shale. Furthermore, determination of weathering influence in source area, by using CIA index, indicated that the source area of these deposites has been exposed to intense weathering. This can be explained by humid weather in source area of passive continental margin.
http://www.gsjournal.ir/article_55051_db3b18870345aca3775aae9ebc6d5556.pdf
ژئوشیمی
برخاستگاه
کوارتزارنایت
شیل
حاشیه غیرفعال
Geochemistry
Provenance
Quartzarenite
Shale
Passive Margin
per
سازمان زمین شناسی و اکتشافات معدنی کشور
فصلنامه علمی علوم زمین
1023-7429
2645-4963
2011-05-22
20
79
113
120
10.22071/gsj.2011.55053
55053
Original Research Paper
خاستگاه ماگمایی و جایگاه زمینساختی سنگهای آتشفشانی و پلوتونیک ائوسن- الیگوسن منطقه زندآباد در شمالباختر اهر (نوار طارم- قره داغ)
Magmatic Origin and Tectonic Setting of the Eocene - Oligocene Volcanic and Plutonic Rocks from the Zand-Abad Area,
NW Ahar (Tarom-Qaredagh Zone)
زهره عظیم زاده
azimzadeh@tabrizu.ac.ir
1
محمد هاشم امامی
hashememami@yahoo.com
2
رباب حاجی علی اوغلی
hajialioghli@tabrizu.ac.ir
3
گروه زمینشناسی، دانشکده علوم طبیعی، دانشگاه تبریز، تبریز، ایران
پژوهشکده علومزمین، سازمان زمینشناسی و اکتشافات معدنی کشور، تهران، ایران
گروه زمینشناسی، دانشکده علوم طبیعی، دانشگاه تبریز، تبریز، ایران
منطقه زند آباد در شمالباختر شهرستان اهر در شمال آذربایجان واقع شده است. سنگهای آذرین این منطقه شامل انواع مختلف سنگهای گرانیتویید با ترکیب مونزوگرانیت، گرانودیوریت، مونزونیت و سینوگرانیت، سنگهایی با ترکیب دیوریت و سنگهای آذرین بیرونی با ترکیب آندزیت، تراکی آندزیت، داسیت، تراکی داسیت و ریولیت است. دیوریت پورفیری و مونزودیوریت پورفیری از انواع سنگهای آذرین نیمه ژرف هستند. بر اساس بررسیهای مختلف ژئوشیمیایی محیط زمینساختی سنگهای آتشفشانی و پلوتونیکی زندآباد، حاشیه قارهای مربوط به فروخزشهای تأخیری فرورانش تعیین میشود که در ارتباط با ماگماتیسم پس از برخورد نئوتتیس تفسیر میشود. با در نظر گرفتن شواهد کانیشناسی و ژئوشیمیایی به نظر میرسد منشأ انواع سنگهای آذرین پلوتونیک و آتشفشانی همسان بوده و از ماگمای مولد واحدی مشتق شدهاند. این ماگما به احتمال در حین صعود متحمل تبلور بخشی، آمیختگی ماگمایی و آلایش پوستهای شده و منشأ هیبرید نشان میدهد. ترکیب ماگمای تشکیل دهنده انواع سنگهای آذرین زندآباد قلیایی بوده و ویژگی کلسیمی- قلیایی و شوشونیتی برخی از سنگها را به احتمال بتوان در ارتباط با فرایندهای آمیختگی ماگمایی و آلایش با سنگهای پوستهای در نظر گرفت.
The Zand-Abad area is located in NW Ahar of north Azerbaijan. Magmatic rocks in this area consists of granitoids including monzogranite, granodiorite, monzonite and syenogranite as well as mafic rocks mainly diorite and associated extrusive rocks as andesite, trachyandesite, dacite, trachydacite, rhyolite. Subvolcanic rocks are porphyritic diorite and porphyritic monzodiorite. According to the different geochemical studies, the tectonic environment of Zand-Abad volcanic and plutonic rocks is determined as continental arc setting related to dilatory creep down subduction. This will be interpreted in relation with the Neotethyse post-collision activities. Considering the mineralogy and chemical evidence, we suggest that the Zand-Abad magmatic rock types (i.e. volcanic, sub-volcanic and plutonic rocks) have been derived from single magmatic source and undergone fractional crystallization, magma mixing and crustal contamination, resulting from hybrid granitoids. Magmatic series of the different types of magmatic rocks is alkaline. Calc-alkaline and shoshonite property of some samples is interpreted related to magma mixing and crustal contamination processes.
http://www.gsjournal.ir/article_55053_2b1ce1420e949e7bac585a127ca68c06.pdf
فروخزشهای تأخیری
فعالیت پس از برخورد
ذوب بخشی
تبلور بخشی
آمیختگی ماگمایی
آلایش پوستهای
ماگمای دو رگه
زندآباد
نوار طارم- قره داغ
Dilatory Creep Down
Post-Collision Activity
Partial Melting
Fractional Crystallization
Magma mixing
Crustal contamination
Hybrid Magma
Zand-Abad
Tarom- Qaredagh zone
per
سازمان زمین شناسی و اکتشافات معدنی کشور
فصلنامه علمی علوم زمین
1023-7429
2645-4963
2011-05-22
20
79
121
128
10.22071/gsj.2011.55054
55054
Original Research Paper
نقشه برداری مناطق دگرسان شده با استفاده از تصاویر سنجنده های استر و ETM+ در نیمه شمالی نقشه زمین شناسی 1:100000 بافت
Mapping of Hydrothermally Altered Areas Using ASTER and ETM+ Data in Northern Half of Baft Geological Map
فیض اله معصومی
masoumi61@gmail.com
1
حجت اله رنجبر
h.ranjbar@mail.uk.ac.ir
2
بخش مهندسی معدن، دانشگاه شهید باهنر کرمان، کرمان، ایران
بخش مهندسی معدن، دانشگاه شهید باهنر کرمان، کرمان، ایران
منطقه مورد بررسی بخشهایی از کمربند آتشفشانی- رسوبی دهج- ساردوئیه و کمربند افیولیتی در نیمه شمالی نقشه 1:100000 بافت را شامل میشود. هدف از انجام این پژوهش استفاده از تصاویر چندطیفی سنجندههای ASTER و ETM+ به منظور تعیین مناطق دگرسان شده با به کارگیری روشهای مختلف پردازش تصویر است. برای تفکیک زونهای دگرسان شده از ترکیب دروغین رنگی نسبتهای باندی تصاویر استر استفاده شد و زونهای فیلیک و پروپیلیتیک شناسایی شدند. ترکیب دروغین رنگی تصاویر استر برای جداسازی مناطق دگرسان شده از مناطق کربناتی بسیار مناسب بود. روش دیگر برای جداسازی مناطق دگرسان شده از رگههای کربناتی استفاده از تجزیه مؤلفههای اصلی بود. این تجزیه بر روی دادههای محدوده کوتاه موج فروسرخ استر صورت گرفت و با استفاده از یک ترکیب دروغین رنگی به صورت (PC2, PC3, -PC4) این مناطق از یکدیگر تفکیک شدند. از روش نقشهبردار زاویه طیفی نیز برای شناسایی کانیهای مناطق دگرسان شده مانند مسکوویت، کلریت، اپیدوت استفاده شد. نمونهبرداری از مناطق دگرسان شده و تجزیه نمونهها نشان داد که میتوان از این روش برای شناسایی کانیهای مناطق دگرسان شده در صورتی که دارای گسترش کافی در سطح زمین باشند، استفاده نمود.
The study area covers the northern half of the Baft 1/100000 geological map in Dehaj-Sarduiyeh volcanic-sedimentary and ophiolitic belts. The aim of this research was application of multispectral ASTER and ETM+ data for determining the altered areas by using different image processing techniques. In order to separate altered zones, false color composite of the ratios was applied on ASTER data that separated propylitic and phyllic/argillic altered zones. Separation of carbonate areas from the altered areas was achieved by making false color composite ratios. Another method for separation of carbonate areas from the altered zone was by applying principal component analysis (PCA) on short wave bands of ASTER data. A color composite of PC2, PC3, -PC4 in red, green and blue respectively was useful for separating carbonate from altered areas. Spectral Angle mapper method was also used for recognizing and mapping the minerals such as muscovite, chlorite, kaolinite, calcite and epidote in altered zones. Sampling from the altered areas and their analysis showed that this method could be used for recognizing the minerals in the altered areas, if they have enough spatial extent.
http://www.gsjournal.ir/article_55054_9ee4f715fd943fe486cf03384a51dc46.pdf
استر
Etm+
نقشه بردار زاویه طیفی
مؤلفه های اصلی
نسبت های باندی
بافت
Aster
Etm+
Spectral Angle Mapper
Principal Components
Band Ratios
Baft
per
سازمان زمین شناسی و اکتشافات معدنی کشور
فصلنامه علمی علوم زمین
1023-7429
2645-4963
2011-05-22
20
79
129
136
10.22071/gsj.2011.55057
55057
Original Research Paper
رتبه بندی مواد معدنی کشور با استفاده از روش تحلیل سلسله مراتبی
Ranking of Iran Minerals using Analytical Hierarchy Process
رضا شکورشهابی
shahabi@mim.gov.ir
1
رضا کاکایی
2
محمدحسین بصیری
3
دانشگاه صنایع و معادن ایران، تهران، ایران
دانشکده مهندسی معدن و ژئو فیزیک، دانشگاه صنعتی شاهرود، شاهرود، ایران
دانشکده فنی و مهندسی، دانشگاه تربیت مدرس، تهران، ایران
ذخایر معدنی ایران، از بهترین برتریهای بالقوه کشورمان برای رشد متوازن هستند که با سرمایهگذاری صحیح در بهرهبرداری از این منابع با ارزش، امکان کسب ارزش افزوده مناسب در بخشهای مختلف اقتصادی کشور فراهم میشود. بنابراین یکی از ملزومات سیاستگذاری مؤثر در بخش معدن، شناسایی مواد معدنی اولویتدار برای سرمایهگذاریهای آینده است. در این مقاله از روش تحلیل سلسله مراتبی که در آن یک مسئله تصمیمگیری به سطوح مختلف هدف، معیارها، زیرمعیارها و گزینهها تقسیم میشود رتبهبندی جامع 33 ماده معدنی و انتخاب گزینههای مناسب برای سرمایهگذاری با در نظر گرفتن 6 معیار اصلی شامل معیارهای اقتصادی و بازار، سرمایهگذاری، اشتغال، استراتژیک، فنی، اجتماعی و زیستمحیطی و 29 زیرمعیار انجام گرفت. برای انجام رتبهبندی، ابتدا با انجام مصاحبههای حضوری از صاحبنظران بخش معدن کشور، میزان اهمیت هریک از معیارها و زیرمعیارهای یادشده بر مبنای تحلیل سلسله مراتبی تعیین و سپس امتیاز هر یک از مواد معدنی برآورد شد. نتایج، بیانگر آن است که مواد معدنی مس، آهن، فسفات، سرب و روی، زغال و طلا دارای بالاترین اولویت برای سرمایهگذاری هستند. همچنین بر اساس نظرسنجی انجام شده از صاحبنظران حوزههای مختلف فعال در بخش معدن، معیارهای اقتصادی از بالاترین میزان اهمیت و معیارهای اجتماعی و زیست محیطی از کمترین اهمیت برخوردار هستند.
Mineral Resources which can be regarded as a best potential opportunity to sustainable development of the country. Consequently appropriate investment in exploitation of these reserves can achieve high value added to the most industries. Therefore, it is necessary to recognize the priority of minerals for future investments. In this paper, the Analytical Hierarchy Process, in which a complex problem is modeled in a hierarchical structure showing the relationships of the goal, objectives (criteria) and alternatives, is used to recognize high priority 33 minerals for future investment with regards to the 6 criteria and 29 sub-criteria. For this purpose, on the bases of interview with mineral sector experts weights of criteria are calculated and then the piority of each mineral is determined for investments. The results show that copper, Iron, Phosphate, lead and zinc, coal, gold have high priority for future investments.
http://www.gsjournal.ir/article_55057_f906e5ac9e1a327b896c8ba57e2c9699.pdf
رتبه ربندی مواد معدنی
تصمیمگیری چند شاخصه
سرمایهگذاری
روش تحلیل سلسله مراتبی
Mineral ranking
Multiple Attribute Decision Making
Investment
Analytical Hierarchy Process
per
سازمان زمین شناسی و اکتشافات معدنی کشور
فصلنامه علمی علوم زمین
1023-7429
2645-4963
2011-05-22
20
79
137
142
10.22071/gsj.2011.55058
55058
Original Research Paper
شناسایی پهنه آبخوان تحت فشار و نقش آن در شکلگیری فرونشست زمین در دشت هشتگرد
Investigation on Confined Aquifer & its Role on Subsidence Occurrence in Hashtgerd Plain
امیر شمشکی
shemshaki2000@yahoo.com
1
یوسف محمدی
2
محمد جواد بلورچی
3
گروه مخاطرات، زمینشناسی مهندسی و ژئوتکنیک، سازمان زمینشناسی و اکتشافات معدنی کشور، تهران، ایران.
گروه مخاطرات، زمینشناسی مهندسی و ژئوتکنیک، سازمان زمینشناسی و اکتشافات معدنی کشور، تهران، ایران
گروه مخاطرات، زمینشناسی مهندسی و ژئوتکنیک، سازمان زمینشناسی و اکتشافات معدنی کشور، تهران، ایران.
روش تداخل سنجی ماهوارهای امواج رادار (InSAR) نشان میدهد که در پهنهای گسترده از دشت هشتگرد در استان تهران با موقعیت جغرافیایی″45 ′47 °35 تا ″05 ′03°36 عرض شمالی و″05 ′ 29 °50 تا ″28 ′54 °50 طول خاوری ، فرونشست زمین با نرخ بیشینه 16 و نرخ متوسط4/8 سانتیمتئر بر سال شکل گرفته است. بهطورکلی آبخوان اصلی دشت از رسوبات آبرفتی سازند کهریزک و تهران با نفوذپذیری زیاد تشکیل شده است که قابلیت هدایت هیدرولیکی بالایی دارند. سازند کهریزک شامل شن، ماسه و سیلت است و بهطور پراکنده در شمال دشت دیده میشود. سازند تهران در مخروط افکنه، از قلوهسنگ، شن، ماسه و رس تشکیل شده است و بهسوی مرکز وجنوب دشت، بر مقدار مواد دانهریز آن افزوده میشود. فرونشست زمین فقط در پهنه سازند آبرفتی تهران شکل گرفته است و در پهنه سازند کهریزک مشاهده نمیشود. با استفاده از دادههای ژئوالکتریک و نگاشت چاههای اکتشافی و بهرهبرداری، یک پهنه آبخوان تحت فشار تا نیمه تحت فشار در زیر یک آبخوان آزاد در جنوب و باختر دشت تشخیص داده شده است که همخوانی بسیار زیادی با پهنه فرونشست دارد. کل آبهای نفوذ یافته از سطح دشت بهطور معمول فقط صرف تغذیه آبخوان آزاد بالایی میشود. بهرهبرداری بیرویه از آبخوان تحت فشار وآبخوان آزاد شمال دشت که تنها منبع اصلی تغذیه آبخوان تحت فشار است، موجب شکلگیری فرونشست زمین در این منطقه شده است. برای اعمال برنامهریزی و مدیریت مناسب برای کاهش و یا توقف نرخ فرونشست زمین در این دشت، این سازوکار باید مورد توجه قرار گیرد.
Based on recent research by geological survey of Iran (GSI), an extensive subsidence area was observed in Hashtgerd plain (Tehran province). The geographical position of this area is 35° 47' 45" to 35° 03' 05" N and 50° 29' 05" to 50° 54' 28" E. The maximum and mean rates of this subsidence are 16 and 8.4 cm per year. In general, the main aquifer of plain is composed of Kahrizak and Tehran formations. These formations are alluvium type. The Kahrizak formation consists of gravel, sand and silt. This formation scatters in north of plain. Tehran formation is composed of pebble, gravel, sand and clay in fluvial cone form. Toward the center and south of plain the amount of fine material increases. The subsidence is shown in Tehran formation only. Based on geoelectrical and well-logs data, the confined to semi confined aquifer area is recognized in south and west of Hashtgerd plain. This area is in accordance with subsidence area. In the upper part of confined aquifer we can find an unconfined aquifer. The whole of penetrated water from surface of plain recharges the unconfined aquifer. The extortion of water from confined aquifer and unconfined aquifer in north of plain has caused subsidence phenomena. The unique recharge resources of confined aquifer is unconfined aquifer in north of plain. To take notice of the position and properties of confined and unconfined aquifers in this place is very important in suitable planning and management to prevent and mitigate subsidence occurrence in future.
http://www.gsjournal.ir/article_55058_18f0c10f184ea61d6d0d4310dc7f719c.pdf
دشت هشتگرد
فرونشست زمین
روش InSAR
آبخوان تحت فشار
Hashtgerd plain
subsidence
InSAR method
Confined aquifer
per
سازمان زمین شناسی و اکتشافات معدنی کشور
فصلنامه علمی علوم زمین
1023-7429
2645-4963
2011-05-22
20
79
143
156
10.22071/gsj.2011.55069
55069
Original Research Paper
کانسار روی- سرب چاهمیر، نمونهای از کانسارهای رسوبی- بروندمی نوع Selwyn، حوضه بافق، ایران مرکزی
Chahmir Zn-Pb Deposit, a Typical Selwyn-Type (Vent Proximal) Sedex Deposit, Bafq Basin, Central Iran
عبدالرحمان رجبی
rahman.rajabi@ut.ac.ir
1
ابراهیم راستاد
2
نعمتاله رشیدنژاد
3
رامین محمدی نیائی
4
دانشکده علوم پایه، دانشگاه تربیت مدرس، تهران، ایران
دانشکده علوم پایه، دانشگاه تربیت مدرس، تهران، ایران
دانشکده علوم پایه، دانشگاه تربیت مدرس، تهران، ایران
شرکت معدنکاران انگوران، زنجان، ایران
کانسار روی- سرب چاهمیر در جنوب خاور حوضه بافق، یکی از چندین کانسار روی- سرب (مانند کوشک، زریگان و دره دهو) است که در توالی رسوبی- آتشفشانی کامبرین پیشین، همزمان با رخداد اقیانوسهای بدون اکسیژن (Oceanic anoxic event) جهان در کامبرین، در یک محیط کافت پشت کمانی، تشکیل شده است. واحدهای سنگی میزبان کانسار سیلتستون سیاه دارای مواد آلی با میانلایههایی از توف و توف سیلتی هستند که توسط توفهای کربناتی سبزرنگ پوشیده شده است. در کانسار چاهمیر، بر اساس ماهیت کانهزایی سولفیدی، بافت و کانیشناسی سولفیدها، میتوان چهار رخساره را از هم متمایز کرد. این رخسارهها بر اساس جایگاه آنها نسبت به محل خروج سیالهای کانهساز عبارتند از: 1) رخساره کانسنگ تودهای (رخساره دهانهای) که بخش ستبر، پرعیار و تودهای کانسار را در خاور آن تشکیل داده و شامل دو زیررخساره سولفیدی- سیلیسی- کربناتی، در مرکز و سولفیدی-کربناتی در اطراف آن است. بافت سولفیدها در این رخساره به صورت تودهای، جانشینی، رگه- رگچهای و کلوفرم برشی شده است. 2) رخساره رگه- رگچهای (زون تغذیهکننده) شامل رگههای سولفیدی و سیلیسی است که به صورت قطعکننده لایهبندی سنگ میزبان، در زیر رخساره کانسنگ تودهای تشکیل شده است. بافتهای رگه- رگچهای و جانشینی سولفیدها سیمای اصلی این رخساره را تشکیل میدهند. 3) رخساره کانسنگ لایهای که ستبرای کمتری نسبت به رخساره کانسنگ تودهای دارد و با سیمای لایهای و نواری و عیار پایین ماده معدنی قابل تشخیص است. این رخساره، به صورت سولفیدهای لامینه و نواری همروند با لایهبندی سنگ میزبان (چینهسان)، در بخش مرکزی کانسار تشکیل شده است. 4) رخساره حاشیهای، در بخش انتهایی باختر کانسار تشکیل شده و در واقع معادل رسوبی رخساره کانسنگ لایهای را میسازد. مهمترین ویژگی این رخساره وجود پیریت دانهپراکنده، نوارهای چرت و باریت است. با توجه به مهمترین ویژگیهای کانهزایی در منطقه چاهمیر، از جمله محیط زمینساختی، سنگ دربرگیرنده، کانیشناسی، محتوای فلزی، حضور رخسارههای چهارگانه و مقایسه آنها با ذخایر روی- سرب با میزبان سیلتستون و شیلی نوع Sedex، میتوان کانسار روی- سرب چاهمیر را در رده کانسارهای رسوبی- بروندمی نزدیک به دهانه بروندم (Selwyn-Type (Vent Proximal) SEDEX Deposits) در نظر گرفت و در ایران معرفی کرد.
Chahmir Zn-Pb deposit is one of several sediment-hosted Zn-Pb deposits (e.g., Koushk, Zarigan, Dareh Dehu & Cheshmeh Firuzeh) located in southeast of Bafq basin hosted within a Early Cambrian volcano-sedimentary sequence, simultaneous with global Cambrian ocean anoxic event, forming in a rift environment. The host rock units of the Chahmir Zn-Pb deposit includes organic-rich black siltstones with intercalations of tuff and silty tuff overlain by green carbonaceous tuffs. Based on nature of sulfide mineralization, mineralogy and textures of sulfide minerals, the Chahmir deposit can be divided into four different facies. Based on their situation towards the vent of mineralization fluid, these facies include: 1) A massive ore facies (Vent Complex) forms the thicker part of generally massive higher grade ores in east of the deposit. This facies includes two subfacies: the sulfide-silica-carbonate subfacies in center of massive ore and sulfide-carbonate subfacies around it. Sulfide minerals are observed as massive, replacement, vein-veinlets and brecciated colloform textures. 2) Vein-veinlets facies (Feeder Zone) includes sulfide veins and silica that form as a scissors of host rocks under the massive ore facies. Vein-veinlets and replacement textures form main features of this facies. 3) Bedded ore facies which is thinner than the massive ore facies and is characterized by layered and banded feature and low grade ore. This facies occurs as stratiform laminated and banded sulfides contemporaneous with the formation of the host rocks. 4) Distal facies is formed at west of the deposit which is actually a sedimentary equivalent of bedded ore facies. Main characteristics of this facies are presence of disseminated pyrite, banded chert and barite. The most important characteristics of mineralization at the Chahmir deposit such as tectonic setting, host rocks, mineralogy, diffrent facies, show similarities to siltstone and shale hosted Zn-Pb Sedex type deposits. Accordingly, Chahmir is regarded as a Selwyn-Type (Vent Proximal) SEDEX deposit.
http://www.gsjournal.ir/article_55069_78a074174d2ef61f48686d356b8766a4.pdf
کانسار روی- سرب
Sedex
Selwyn-Type
Vent Proximal
رخساره تودهای
رگه- رگچهای
لایهای
حاشیهای
چاهمیر
بافق
ایران مرکزی
Zn-Pb deposit
Selwyn-Type
Vent Proximal
Sedex
Massive ore (vent complex)
Feeder zone
Bedded ore
Distal facies
Chahmir
Bafq
Central Iran
per
سازمان زمین شناسی و اکتشافات معدنی کشور
فصلنامه علمی علوم زمین
1023-7429
2645-4963
2011-05-22
20
79
157
164
10.22071/gsj.2011.55071
55071
Original Research Paper
برخاستگاه ماسهسنگهای ژیوتین- فرازنین در مقطع کوه تیزی (شمال خاور کرمان)، ایران مرکزی
Provenance of the Givetian-Frasnian Sandstones in the Kuh-e-Tizi Section (Northeastern Kerman), Central Iran
سید حسن حجازی
hhejazi@yahoo.com
1
محمد حسین آدابی
rakhshande.abasi@gmail.com
2
سید رضا موسوی حرمی
moussavi@um.ac.ir
3
گروه زمینشناسی، دانشکده علوم پایه، دانشگاه آزاد اسلامی واحد علوم و تحقیقات، تهران، ایران
گروه زمینشناسی، دانشکده علوم زمین، دانشگاه شهید بهشتی، تهران، ایران
گروه زمینشناسی، دانشکده علوم پایه، دانشگاه فردوسی، مشهد، ایران
ماسهسنگهای ژیوتین- فرازنین کوه تیزی (واقع در 25 کیلومتری شمال خاور کرمان) بهطور ناپیوسته بر روی سنگهای کامبرین بالایی سازند کوهبنان قرار گرفتهاند و خود توسط نهشتههای کربنیفر زیرین سازند هوتک (با یک ناپیوستگی فرسایشی) پوشیده میشوند. در این ماسهسنگها که از نوع کوارتزآرنایت هستند، بیشتر دانهها کوارتز متوسط تا بسیار ریزدانه (بههمراه مقادیر بسیار کم فلدسپار، خردهسنگ و کانی سنگین) نیمهزاویهدار تا گرد شده هستند و جورشدگی خوبی دارند. مهمترین فرایندهای دیاژنتیکی، تراکم فیزیکی و شیمیایی شدید (مرز دانهها بهصورت مستقیم، محدب- مقعر و مضرسی و آثار انحلال ناشی از فشار)، کاهش بسیار زیاد تخلخل میاندانهای بهدلیل آرایش دوباره دانهها و تشکیل سیمان سیلیسی است. دادههای سنگنگاری، منشأ نفوذی درون کراتونی را نشان میدهد و تجزیه عناصر فرعی و نسبتهایشان (Th/Sc & La/Sc)، مشابهت این سنگها با رسوبات حاصل از هوازدگی سنگهای فلسیک را تأیید میکند. میانگین شاخص CIA و PIA برای این سنگها بهترتیب 96/69 و 8/75 (بیش از 60) و گویای هوازدگی متوسط تا زیاد برای سنگ منشأ یا در هنگام حمل و نقل رسوبات (پیش از نهشت پایانی) است. نتایج حاصل از رسم اکسیدهای اصلی و عناصر فرعی این نمونهها بر روی نمودارهای مختلف، نهشت در یک محیط رسوبی وابسته به حوضه حاشیه قارهای غیرفعال را نشان میدهد.
The Givetian-Frasnian sandstones in the Kuh-e-Tizi section (25 km NE Kerman), unconformably overlie the Upper Cambrian Kuhbanan and underlie the Lower Carboniferous Hutk Formations respectively, in southeastern Central Iran. Petrographical data show that these sandstones are well-sorted, sub-angular to rounded quartzarenite. Diagenetic features include physical and chemical compactions (straight, concavo-convex, sutured grain contacts and pressure solution of quartz grain), reduction of the pore space through rearrangements and cementation (mostly silica, as quartz overgrowth). The provenance and tectonic setting of these sandstones have been interpreted using integrated petrographic and geochemical data. Petrographic analysis using standard methods revealed that mono and poly-crystalline quartz grains have been derived from plutonic rocks of an interior cratonic setting. Trace element analyses and their ratios used for provenance studies (Th/Sc and La/Sc) are similar to sediments derived from weathering of mostly felsic rocks. Values representing chemical index of alteration (CIA) and the plagioclase index of alteration (PIA) range from 44.24 to 83.43, with an average of 69.96, and from 42.98 to 92.56, with an average of 75.8, respectively. However, most samples have values greater than 60, suggesting moderate to high weathering in the source area or during transportation prior to find deposition. Major and trace element concentrations indicated a depositional setting in a passive continental margin.
http://www.gsjournal.ir/article_55071_ada060c731ec97cc28dc2f1a2ac5bd1f.pdf
ماسهسنگ
ژیوتین- فرازنین
هوازدگی
برخاستگاه
جایگاه زمینساختی
ایران
Sandstone
Givetian-Frasnian
Weathering
Provenance
Tectonic setting
Iran
per
سازمان زمین شناسی و اکتشافات معدنی کشور
فصلنامه علمی علوم زمین
1023-7429
2645-4963
2011-05-22
20
79
165
170
10.22071/gsj.2011.55072
55072
Original Research Paper
اهمیت پارامترهای مورد استفاده در پهنهبندی زمینساختی خود سامانده ایران
The Significance of Parameters Used for Self-Organized Tectonic Zoning of Iran
احمد زمانی
zamani_a_geol@yahoo.com
1
صدیقه فراحی قصر ابونصر
2
علوم زمین ، علوم پایه ، آزاد ، شیراز، ایران
گروه علوم زمین، دانشکده علوم، دانشگاه شیراز، شیراز، ایران
وجود گسلهای فعال، آتشفشانها، رخداد زمینلرزههای ویرانگر و پستی و بلندیهای فراوان در ایران، بررسی زمینساختی و لرزهزمینساختی این سرزمین را از اهمیت فراوان برخوردارکرده است. در گذشته پهنهبندیهای زمینساختی و لرزهزمینساختی این کشور با استفاده از معدودی دادههای سطحی شامل: مشاهدات صحرایی، عکسهای هوایی، تصاویر ماهوارهای و ... انجام شده است. افزایش حجم دادهها، و لزوم پهنهبندی دقیق و به دور از قضاوتهای شخصی باعث شده که در سالهای اخیر با استفاده از طیف وسیعی از دادههای سطحی و زیر سطحی و کاربرد روشهای آماری چند متغیره، اقدام به تهیه نقشههای رقومی خود سامانده شود. در این مقاله، ابتدا مجموعه گستردهای از اطلاعات زمینشناسی، ژئوفیزیکی و زمینریختشناسی ایران گردآوری و سپس با استفاده از مدلهای آماری، نقشههای رقومی خود سامانده تهیه شده است. بر اساس نتایج حاصل سرزمین ایران به 7 زون زمینساختی تقسیم شده است. چنانچه نقش و اهمیت هر یک از پارامترهای مورد استفاده در پهنهبندی مشخص شود، شاید بتوان به منظور سهولت و تسریع در کار پهنهبندی فقط پارامترهای مهم را مورد استفاده قرار داد. از این رو تعیین نقش و اهمیت هر یک از پارامترهای مورد استفاده در انجام پهنهبندی زمینساختی از اهمیت فراوان برخوردار است. در این راستا با استفاده از روشهای آماری تحلیل واریانس، نقش پارامترها در پهنهبندی مشخص شده است. نتایج حاصل نشان میدهد که از بین پارامترهای مورد استفاده شاخصهای زلزلهخیزی، رخنمون سنگهای سنوزوزییک و ناهنجاریهای ثقلی به ترتیب بیشترین نقش را در این پهنهبندی ایفا نمودهاند. در ادامه با کاربرد روشهای کاهش ابعاد، پارامترهای مورد استفاده در پهنهبندی بر اساس ارتباط درونی و میزان همبستگی در 12 گروه تفکیک شدهاند. در اینجا نکته حائز اهمیت این است که برخلاف استفاده فراوان از مقادیر b , a رابطه گوتنبرگ - ریشتر در تهیه نقشههای زلزلهخیزی و لرزهزمینساختی، این پارامترها نه تنها نقش مهمی در پهنهبندی نداشته، بلکه از همبستگی ضعیفی با دیگر پارامترهای مؤثر در زونبندی برخوردار هستند. بنابراین به نظر میرسد برآوردها و نقشههای تهیه شده با استفاده از این مقادیر ثابت از اعتبار علمی لازم برخوردار نیستند.
The Iranian plateau is one of the active tectonic regions on the earth. Non-uniformly distribution of deformation and repetitive activity of faults have cause a complex pattern of tectonic and seismotectonic activity of Iran. Therefore, in order to study the seismic and geological behaviors of different parts of the country one has to perform tectonic and seismotectonic zoning. Tectonic and seismotectonic zoning of Iran began by conventional methods in the past and developed by numerical zoning in recent years. Conventional methods aren't capable for producing detailed zoning maps. Recently numerical data and statistical and mathematical models have used for produce modern numerical maps. The advantage of numerical pattern recognition is that this method is a powerful tool for objective interpretation of massive of data. Multivariate statistical methods not only apply for tectonic zoning, but also this is useful to reveal the degree of significance and relationship between effective variables on tectonic zoning. In this paper, a large numbers of up-to-date geophysical, seismological, geological and geomorphological data have analyzed by using multivariate statistical methods to produced self-organized numerical tectonic and seismotectonic zoning of Iran. Based on this techniques a seven zoning tectonic and seismotectonic map has constructed for Iran. The role and significance of various parameters have also investigated using ANOVA method. The results indicate that some of the parameters play more important role in self-organized zoning. Based on relationships between parameters, they are been classified into 12 groups. Variables in each group present maximum correlation with each other. It is interesting to note that despite the frequent application of a- and b- values of the Gutenberg Richter magnitude frequency formula, these values show poor correlation with others and do not play a significant role in zoning.
http://www.gsjournal.ir/article_55072_b2125ff144d7de34c171823a9913f931.pdf
آمار چند متغیره
الگوشناسی
زمینساخت
لرزهزمینساخت
لرزهخیزی
ایران
Multivariate Statistics
Pattern Recognition
Tectonics
Seismotectonics
Seismicity
Iran
per
سازمان زمین شناسی و اکتشافات معدنی کشور
فصلنامه علمی علوم زمین
1023-7429
2645-4963
2011-05-22
20
79
171
182
10.22071/gsj.2011.55117
55117
Original Research Paper
چینه شناسی سکانسی توالی های کربناتی- تبخیری سازند دشتک در چاه آغار 1 و آغار باختری 1 در میدان گازی آغار
Sequence Stratigraphy of Carbonate–Evaporite Successions of Dashtak Formation in Aghar#1and West Aghar#1 Boreholes in Aghar Gas Field
مهدی خشنودکیا
1
حسن محسنی
mohseni@basu.ac.ir
2
محمود حاجیان
3
گروه زمین شناسی، دانشکده علوم، دانشگاه بوعلی سینا، همدان، ایران.
گروه زمینشناسی، دانشکده علوم، دانشگاه بوعلی سینا، همدان، ایران.
اداره کل اکتشاف و تولید، شرکت ملی نفت ایران، تهران، ایران.
سازند دشتک با رسوبات کربناتی- تبخیری یکی از پوشسنگهای مهم حوضه زاگرس است که در دو چاه (آغار#1 و آغار باختری#1) بررسی شده است. دادههای سنگنگاری در این مطالعه بهمنظور چینهشناسی سکانسی سازند دشتک از مقاطع نازک تهیه شده از خردههای حفاری بههمراه دادههای چاهنگاری (گاما- صوتی) استفاده شده است. سازند دشتک متشکل از هشت کمربند رخسارهای شامل رخسارههای پهنه ساحلی، پهنه فراکشندی، کشندی، لاگون، شول، دریای محدود، دریای باز و رمپ میانی است. در این سازند چهار سکانس رسوبی شناسایی شد که با دو مرز سکانسی نوع یک و سه مرز سکانسی نوع دو فرا گرفته شدهاند. سازند دشتک با محیط رمپ هموکلاین و تغییرات جانبی کم محیط رسوبی باعث شده است که تغییرات جانبی سکانسهای سازند در ناحیه مورد مطالعه کم باشد.
Carbonate – evaporates intervals of Dashtak formation is an important cap rocks in Zagros basin. Sequence stratigraphic analysis of Dashtak Formation in two wells (Aghar#1; West Aghar#1) was investigated in sequence stratigraphic framework. Data obtained from petrographic examinations of thin sections prepared from cuttings, in addition, a full suite of gamma ray and sonic logs were interpreted. Dashtak Formation comprises eight facies belts that are: (i) detrital clastics, (ii) supratidal, (iii) tidal flat, (iv) lagoon, (v) shoal, (vi) restricted marine, (vii) open marine, (viii) mid ramp. Dashtak Formation consists of four sequences with four transgressive, regressive and maximum flooding surfaces. Two sequence boundaries type I and three sequence boundaries type II were recognized in the Dashtak Formation. As far the depositional environment of the formation is interpreted as a homocline ramp with mild lateral changes in depositional environment, hence negligible lateral changes of stratigraphic sequences are expected in the study area.
http://www.gsjournal.ir/article_55117_ce1ff1d532bddb31581a1df903c451df.pdf
سازند دشتک
چینه شناسی سکانسی
رمپ
میدان گازی آغار
فارس ساحلی
Dashtak Formation
Sequence Stratigraphy
Ramp
Aghar Gas Field
Costal Fars
per
سازمان زمین شناسی و اکتشافات معدنی کشور
فصلنامه علمی علوم زمین
1023-7429
2645-4963
2011-05-22
20
79
183
188
10.22071/gsj.2011.55121
55121
Original Research Paper
مطالعه زیستچینهنگاری سازند گورپی در برش پلدختر (تاقدیس کوه سلطان)با استفاده از نانوفسیلهای آهکی
Biostratigraphy Study of Gurpi Formation in Poldokhtar Section (Kuh-Soltan Anticline) based on Calcareous Nannofossils
محمدعلی سینا
msina1948@gmail.com
1
سید علی آقانباتی
2
انوشیروان لطفعلی کنی
3
علیرضا بهادری
4
گروه زمینشناسی، دانشکده علوم، دانشگاه شهید چمران، اهواز، ایران
سازمان زمینشناسی و اکتشافات معدنی کشور، تهران، ایران
دانشکده علوم زمین، دانشگاه شهید بهشتی، تهران، ایران
گروه زمینشناسی، دانشکده علوم، دانشگاه شهید چمران، اهواز، ایران
با توجه به فراوانی نسبی و محدوده چینهشناسی کوتاه و گسترش جغرافیایی گسترده نانوفسیلهای آهکی، این گروه از فسیلها ابزار بسیار مناسبی برای زیرتقسیم بندی زیستچینهنگاری، بویژه در کرتاسه پسین هستند. در این راستا، 131 اسلاید میکروسکوپی از رسوبات شیلی و مارنی سازند گورپی با ستبرای 320 متر در برش پلدختر تهیه و 22 جنس و 35 گونه شناسایی و جدول گسترش آنها رسم شد. مطالعه پراکندگی گونههای نانوفسیلی نشان میدهد که روی هم رفته، 9 زیستزون بر اساس نخستین پیدایش (FO) گونههای شاخص در برش پلدختر وجود دارد که در محدوده زمانی مناطق (CC18-CC26) از منطقهبندی Sissing (1977) قرار میگیرند. بر این اساس، زمان نهشت این سازند از کامپانین زیرین تا پایان ماستریشتین پیشنهاد میشود. حضور گونههای شاخص عرضهای جغرافیایی پایین در برش پلدختر از سازند گورپی دلالت بر قرارگیری حوضه رسوبی تشکیلدهنده رسوبات این سازند در عرضهای جغرافیایی پایین در زمانهای یادشده دارد.
Calcareous nannofossils are suitable for biostratigarphical studies since they are abundant, planktonic, rapidly evolving and largely cosmopolitan, especially in the late Cretaceous. In this regards, 131 microscopic slides from shale and marl sediments of Gurpi formation of Poldokhtar section with thickness of 320 meters were collected. Out of this, 22 genera and 35 species were determined and their range chart is plotted. The distribution of nannofossil species indicates that there are 9 biozones in the study Poldokhtar section that can be separated, based on first occurrence (FO) of index species. They can be placed in CC18-CC26 of Sissingh (1977) time zones. On this basis, the age of sedimentation of this formation can be suggested to be from lower Companion to late Masstrichtian. In addition, presence of index species of low latitude in Poldokhtar section of Gurpi formation shows that this sedimentary basin was located in low latitude at the time of sedimentation.
http://www.gsjournal.ir/article_55121_f8b077a5151af56f8d8cc0b176402b50.pdf
نانوفسیل آهکی
سازند گورپی
زیستچینهنگاری
برش پلدختر
Calcareous Nannofossils
Gurpi Formation
Biostratigarphy
Poldokhtar section