@article { author = {}, title = {سخن سردبیر}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {19}, number = {73}, pages = {1-1}, year = {2009}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {}, abstract = {سخن سردبیر  }, keywords = {سخن سردبیر}, title_fa = {سخن سردبیر}, abstract_fa = {سخن سردبیر  }, keywords_fa = {سخن سردبیر}, url = {http://www.gsjournal.ir/article_57075.html}, eprint = {http://www.gsjournal.ir/article_57075_f397deefffcf45e473f4b5877a4b58cc.pdf} } @article { author = {Shirkhani, M. and Ghaderi, Majid and Rashidnejad-Omran, N. and Mohammadi-Niaei, R.}, title = {Interpretation and Exploratory Application of Enzyme LeachSMData Analysis at AyQalesi Polymetal Deposit, Southeast of Takab}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {19}, number = {73}, pages = {3-10}, year = {2009}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2010.57130}, abstract = {AyQalesi polymetal deposit is located 30 km southeast of Takab in Orumieh-Dokhtar structural zone. For Enzyme LeachSM analysis at the deposit, 723 samples were collected from B-horizon soils. Based on the analytical results and data interpretation, six oxidation anomalies, A through F, have been defined. Five of these are recommended as drill targets while one, anomaly C, is not recommended for drilling because it appears to represent a buried intrusion without significant Zn enrichment. Anomalies B, D and E have very high Zn values. For anomaly D, this is because of outcropping Zn mineralization and the presence of mine waste at surface. Anomalies B and E may occur above shallowly buried mineralized zones. Anomalies A, C and F contain much less Zn. Anomaly A may overlie a concealed zone of Zn mineralization that could be buried to a substantial depth. Anomaly F is not recommended for drilling because it appears to be a quite narrow mineralized zone.}, keywords = {Enzyme Leach,Oxidation anomaly,AyQalesi,Takab}, title_fa = {تفسیر و کاربرد اکتشافی داده های تجزیهEnzyme LeachSM در کانسار چند‌فلزی آی قلعه سی، جنوب خاوری تکاب}, abstract_fa = {کانسار چند‌‌فلزی(Poly metallic) آی­قلعه­سی در 30 کیلومتری جنوب­خاوری تکاب و در زون ساختاری ارومیه- دختر قرار گرفته است. برای انجام تجزیه Enzyme LeachSM در این کانسار، 723 نمونه از افق B خاک برداشت و بر پایه نتایج تجزیه و تحلیل داده­ها، شش ناهنجاری اکسیداسیونی A-F مشخص شد. پنج­ محدوده ناهنجاری­ به‌عنوان اهداف حفاری مشخص شده­اند، در صورتی­که ناهنجاری C برای حفاری مناسب نبوده، زیرا توده­ای مدفون بدون غنی­شدگی روی است. ناهنجاری­های B، D و E دارای مقادیر بالای روی هستند. علت بالابودن روی در ناهنجاری D، برونزدهای کانی­سازی روی و وجود باطله­های معدنی در سطح است. به نظر می­رسد ناهنجاری­های B و E بر روی مناطق کانی‌سازی­شده مدفون (در ژرفای کم) قرار گرفته­اند. ناهنجاری­های A، C و F دارای مقدار بسیار کمی روی هستند. ناهنجاری A ممکن است بر روی یک زون پنهان کانی­سازی روی قرار گرفته ­باشد که در ژرفای زیادی مدفون شده­ است، به همین دلیل یکی از اولویت­های حفاری است. ناهنجاری F برای حفاری مناسب نیست، زیرا به نظر می­رسد که این زون کانی­سازی بسیار باریک باشد.}, keywords_fa = {آنزیم لیچ,ناهنجاری اکسیداسیونی,آی قلعه سی,تکاب}, url = {http://www.gsjournal.ir/article_57130.html}, eprint = {http://www.gsjournal.ir/article_57130_2de4dcf1b9ea6b61d9d2aab252540ac6.pdf} } @article { author = {Masoudi, F. and Mohajjel, M. and Shaker Ardekani, F.}, title = {Study of Chemical and Structural Changes and Determination of Temperature in a Progressive Deformation: Evidences from Zarrin Shear Zone, Ardekan}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {19}, number = {73}, pages = {11-16}, year = {2009}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2010.57195}, abstract = {The Zarrin area in the north of Ardekan is the part of Central Iran Zone. Some homogenous parts of Zarrin granite located in the shear zone changed to mylonites and ultramylonites. Microstructural evidence and deformation investigation show that chemical and structural changes occurred during the progressive deformation in mylonites. The most obvious chemical change is the noticeable decrease on Ti, Mg, Fe and P from mylonites to ultramylonites. Silica shows a slight increase in the mylonitic zone with progressive increase in modal quartz, but Al2O3 is nearly constant during the mylonitization.  Because of decrease on feldspar porphyroclasts and feldspar grains in the matrix, compare to protomylonites, K2O decreases in mylonites. However, with relative increase on plagioclase, K-feldspar and epidote in the matrix, Ca, Na and K increase in ultramylonites. As a result of structural changes, quartz grains in weakly deformed protolith and protomylonite show recrystallization and sub grain. In a progressive deformation process, quartz in mylonites and ultramylonites reveals grain boundary migration in recrystallization. During the progressive deformation, K-feldspars become perthitic with fractures and plagioclases show kinking in their twins. With progress in deformation, recrystallization on K-felspar's margins and twins in plagioclase grains are formed. Based on structural evidence, temperature of 400ºC has been estimated for deformation in Zarrin area in protogranites and protomylonites. The temperature continuously increases up to 500ºC or more in green schist facies in the mylonites and ultramylonites. }, keywords = {Zarrin Granite,Ardekan,Shear zone,deformation}, title_fa = {بررسی تغییرات شیمیایی و ساختاری و تعیین حرارت در یک دگرشکلی پیش‌رونده: شواهدی از پهنه برشی زرین، اردکان}, abstract_fa = {منطقه زرین در شمال اردکان واقع و بخشی از پهنه ایران مرکزی است. بخش‌های همگن و یکنواختی از توده گرانیتی زرین در پهنه برشی قرار گرفته و میلونیت‌ها و اولترامیلونیت‌ها تشکیل شده‌اند.  شواهد ریزساختاری و بررسی دگرشکلی نشان می‌دهد که تغییرات شیمیایی و ساختاری به موازات پیشرفت دگرشکلی در میلونیت‌ها ایجاد شده است. بیشترین تغییرات شیمیایی متعلق به کاهش قابل توجه مقادیر Fe , Mg , Ti   و P  از میلونیت‌ها به اولترامیلونیت‌ها است. سیلیس همزمان با افزایش کوارتز مدال، یک افزایش کند در پهنه میلونیتی نشان می‌دهد؛ ولی میزان Al2O3 در طول میلونیتی شدن، کم و بیش ثابت است. مقدار K2O در میلونیت‌ها نسبت به پروتومیلونیت‌ها به علت کاهش پورفیروکلاست‌های فلدسپار و فلدسپار قلیایی زمینه کاهش می‌یابد. اما با افزایش نسبی پلاژیوکلاز، فلدسپار قلیایی و اپیدوت در زمینه، مقادیرNa ,Ca  و K در اولترامیلونیت‌ها افزایش می‌یابد.  در اثر تغییرات ساختاری، دانه‌های کوارتز در دگرشکلی ضعیف در پروتولیت و پروتومیلونیت‌ها تبلور مجدد و Sub grain  و با پیشرفت دگرشکلی در میلونیت‌ها و اولترامیلونیت‌ها پدیده مهاجرت مرز  دانه‌ای در تبلور مجدد را نشان می‌دهند. در طی دگرشکلی پیشرونده، در فلدسپارهای قلیایی شکستگی و پرتیتی شدن ظاهر می‌شود و ماکل‌های پلاژیوکلاز خمش نشان می دهند. با پیشرفت دگرشکلی پدیده تبلور مجدد در مرز دانه‌های فلدسپار قلیایی و دوقلویی در دانه‌های پلاژیوکلاز شکل می‌گیرند. با توجه به شواهد ساختاری، حرارت دگرشکلی در منطقه زرین به طور پیوسته از حدود  ºC 400 در پروتولیت گرانیت و پروتومیلونیت‌ها تا  ºC 500 یا بیشتر در میلونیت‌ها و اولترامیلونیت‌ها در شرایط مشابه رخساره شیست سبز  افزایش می‌یابد.  }, keywords_fa = {گرانیت زرین,اردکان,پهنه برشی,دگرشکلی}, url = {http://www.gsjournal.ir/article_57195.html}, eprint = {http://www.gsjournal.ir/article_57195_c919695adcc379d92cc32e6297da155b.pdf} } @article { author = {Lashkari, A. and Ghassemi, M. R. and Qorashi, M.}, title = {Effects of Caspian (Khazar) Fault Activity on Geomorphology of Qaemshahr area}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {19}, number = {73}, pages = {17-28}, year = {2009}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2010.57196}, abstract = {The Caspian (Khazar) fault is the boundary between the Caspian plain and AlborzMountain. As a major tectonic feature, this fault may be considered as the northern mountain front fault of the AlborzRange. Subsidence of the Caspian Sea in north, uplift of the Alborz Mountain, and its over thrusting on southern part of South Caspian basin has occurred along the Caspian fault. In this paper, a segment at the fault which is located between longitudes 52° 30׳ and 53° 00׳ - in the northern part of geological map of Qaemshahr - is considered as a segment that does not outcrop. This paper introduces the general structural and morphotectonic characteristics of this zone and describes the characteristics of the active anticlines (growing folds) and morphotectonic effects in this zone such as effects on rivers.}, keywords = {Caspian fault,Qaemshahr,geomorphology,Fold growth}, title_fa = {کارکرد گسل کاسپین (خزر) بر زمین‌ریخت‌شناسی گستره قائم‌شهر}, abstract_fa = {گسل کاسپین(خزر) به عنوان مرز جلگه کاسپین و کوه‌های البرز یک عارضه زمین‌ساختی مهم است که می‌توان آن را گسل پیشانی شمالی رشته کوه البرز در نظر گرفت. فرو نشست گودال کاسپین در شمال و برپایی کوه‌های البرز و راندگی آن بر روی جنوب حوضه کاسپین جنوبی در راستای این گسل صورت می‌گیرد. در این مقاله بخشی از گسل کاسپین بین طول‌های جغرافیایی´30    °52  تا ´00  °53 ، که در نیمه شمالی نقشه زمین‌شناسی‌قائم شهر واقع شده است، به صورت قطعه‌ای در نظر گرفته می‌شود که بر روی زمین رخنمون ندارد  و  هنوز به سطح نرسیده است اما تأثیر عملکرد آن به صورت ساختار‌هایی از جمله تاقدیس‌های در حال رشد نمایان شده است. این مقاله با معرفی ویژگی‌های کلی ریخت‌زمین‌ساختی منطقه به توصیف طاقدیس‌های فعال (در حال رشد) و تأثیرات ریخت‌زمین ساختی- از جمله تأثیر بر روی رودخانه‌های منطقه، از خاور تا باختر منطقه مورد بررسی، می‌پردازد}, keywords_fa = {گسل کاسپین,قائم‌شهر,زمین‌ریخت‌شناسی,تاقدیس درحال رشد}, url = {http://www.gsjournal.ir/article_57196.html}, eprint = {http://www.gsjournal.ir/article_57196_11c7e4fea78fbc79e2bd100b1bae39ac.pdf} } @article { author = {Garaei, P. and Soleimani, K. and Mousavi, S.R. and Kavian, A.}, title = {Regional Modeling of Iandslide Hazard, Using Multivariate Statistic Method in Lajemrood- Sari Basin}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {19}, number = {73}, pages = {29-36}, year = {2009}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2010.57197}, abstract = {In basins of the northern part of Iran, combination of natural and human factors has intensified landslide and related numerous damages. The investigation importance of this phenomena and effective factors of landslide occurrence and also determining susceptible zones it order to preventing and avoiding its effects is required. At the beginning, of this research after field investigation, review of previous works in similar Lajemrood basin and using questionnaire, were recognized primary effective factors on landslide occurrence. Thin preparing effective factors maps in Geographic Information System. In order to quantifying the factors and weighting them, landslides percentage in different units was determined. For statistical analysis of multiple regressions the stepwise method was used which concluded with ignoring the elevation factor as regional model. Finally, geology, land use, slopes and distance from the road has the most effects on landslides. For evaluation of the accuracy of this model, neighboring basing (Varakee basin) with similar characteristics was chosen. The results have indicated that the most recorded area landslides in Varaki basin occurred in high and high hazard zonation. Thus, it can be concluded that presented model can be used for the study area.  }, keywords = {Landslide,Landslide Hazard Zonation,Multiple regression,Modeling,GIS,Lajemrood Basin}, title_fa = {مدل‌سازی منطقه‌ای خطر زمین‌لغزش با استفاده از روش آماری رگرسیون چند متغیره در حوزه آبخیز لاجیم رود ساری}, abstract_fa = {در حوزه‌های شمالی ایران ترکیب عوامل طبیعی و انسانی باعث تشدید پدیده زمین‌لغزش و خسارات زیاد ناشی از آن شده است. لزوم بررسی و تحقیق در خصوص این پدیده، عوامل مؤثر در وقوع آن و همچنین شناسایی مناطق حساس برای پیشگیری یا اجتناب از خسارات ناشی از آن به خوبی احساس می‌شود. در مراحل اولیه این تحقیق، پس از بررسی‌های میدانی، مرور مطالعات انجام شده در مناطق مشابه با حوزه لاجیم رود، استفاده از افراد بومی و تکمیل پرسشنامه‌ها، عوامل مؤثر اولیه در وقوع زمین لغزش‌های منطقه تشخیص داده شدند. سپس لایه‌های اطلاعاتی مربوط به این عوامل در محیط سامانه اطلاعات جغرافیایی تهیه شد. به منظور کمی کردن عوامل و وزن‌دهی آنها از درصد سطح لغزش یافته در واحدهای مختلف استفاده شد و تجزیه و تحلیل آماری رگرسیون چند متغیره با استفاده از روش گام به گام انجام گرفت که در نهایت مدلی با حذف عامل ارتفاع برای منطقه ارائه شد و عوامل زمین‌شناسی، کاربری اراضی، شیب و فاصله از جاده به ترتیب بیشترین تأثیر را دارا بودند، و حوزه آبخیز لاجیم رود با استفاده از مدل به دست آمده از نظر خطر وقوع زمین لغزش پهنه‌بندی شد. در پایان برای ارزیابی درستی مدل و نقشه پهنه‌بندی، مدل به دست آمده را برای حوزه آبخیز مجاور (حوزه ورکی) که از بسیاری لحاظ مشابه حوزه لاجیم رود بود به کار گرفته شد. نتایج نشان داد که بیشترین سطح لغزش یافته در حوزه ورکی در پهنه بسیار پر خطر و خطرناک که با مدل به‌دست آمده از حوزه لاجیم رود پهنه‌بندی شده است اتفاق افتاده است. بنابراین درستی مدل پیشنهادی برای منطقه مورد مطالعه مورد تأیید است.}, keywords_fa = {زمین‌لغزش,پهنه‌بندی خطر زمین‌لغزش,رگرسیون چند متغیره,مدل‌سازی,سیستم اطلاعات جغرافیایی,حوزه آبخیز لاجیم رود}, url = {http://www.gsjournal.ir/article_57197.html}, eprint = {http://www.gsjournal.ir/article_57197_7fb1ef37c3f40d26d9c891685ee86c29.pdf} } @article { author = {Abdi, M. and Ghaderi, Majid and Rashidnejad-Omran, N. and Najafi, A.}, title = {Geochemical Study of Vein-Type Tungsten-Copper Mineralization in Southwest of Shazand}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {19}, number = {73}, pages = {37-50}, year = {2009}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2010.57198}, abstract = {Two cases of tungsten-copper vein-type mineralization have been studied in the Nezam-abad and Deh-hossein areas, in southwest of Shazand. The hydrothermal quartz-tourmaline mineralized veins have different host rocks (biotitic-granite and meta-sandstone). Considering similar ore metals (tungsten-copper-tin-lead-zinc) in the Nezam-abad and Deh-hossein areas, same mineralogy of veins (quartz-dravite) and similar REE variation patterns in the two areas, it is suggested that the Nezam-abad and Deh-hossein mineralized veins have the same origin. It means, when the Br-bearing fluids were active, they caused the quartz-tourmaline vein-type mineralization in this area. Considering the barren intrusions in the area and other mineralogical-geochemical evidences in this study, it could be concluded that tungsten and other metallic elements in the Nezam-abad and Deh-hossein ore-bearing veins have a sedimentary/metamorphic origin.   }, keywords = {Tungsten,copper,Vein-type,Mineralogy,Geochemistry,origin,Nezam-abad,Deh-hossein,Shazand}, title_fa = {بررسی ژئوشیمیایی کانه زایی رگه ای تنگستن- مس در جنوب-باختری شازند}, abstract_fa = {در جنوب­باختری شازند، دو مورد کانه­زایی رگه­ای تنگستن- مس در محدوده­های نظام­آباد و ده­حسین مشخص شده است. رگه­های گرمابی کوارتز- تورمالین کانه­دار، سنگ­های ­­میزبان­ متفاوتی (گرانیت­بیوتیتی و ماسه­سنگ کم­دگرگونه) دارند. با توجه به شباهت فلزات کانه­ساز (تنگستن- مس- قلع- سرب- روی) در دو محدوده ده­حسین و نظام­آباد، یکسان بودن کانی‌شناسی رگه­ها (کوارتز-تورمالین نوع دراویت) و مشابهت الگوی تغییرات REE در این دو محدوده، می‌توان نتیجه گرفت که رگه­های کانه­دار ده­حسین و نظام­آباد، یک منشأ دارند؛ یعنی هنگامی­که فاز سیال حاوی بور در منطقه فعال بوده است، موجب کانه­سازی نوع رگه­های کوارتز-تورمالین­دار در منطقه شده است. همچنین با توجه به بی­بار بودن توده­های نفوذی موجود در منطقه و دیگر شواهد کانی­شناسی- ژئوشیمیایی به‌دست آمده در این پژوهش، می­توان نتیجه گرفت که تنگستن و دیگر عناصر فلزی در رگه­های کانه­دار نظام­آباد و ده­حسین، منشأ رسوبی/ دگرگونه دارند}, keywords_fa = {تنگستن,مس,رگه ای,کانی شناسی,ژئوشیمیایی,منشأ,نظام آباد,ده حسین,شازند}, url = {http://www.gsjournal.ir/article_57198.html}, eprint = {http://www.gsjournal.ir/article_57198_14e4de0b0dc92db7f965de8fc0bc7d2a.pdf} } @article { author = {Khakzad, A. and Khakzad, A. and Asadi, H. and Emami, M.H. and Rasa, I.}, title = {Geochemical Investigation in Exploration Kahang Area}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {19}, number = {73}, pages = {51-56}, year = {2009}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2010.57199}, abstract = {Regional exploration of Kahang is located at 73 km of north east of Esfahan city and 10 km of east of Zefreh town. This deposit is located in Uromieh-Dokhtar volcanoplotonic belt. For the first time this deposit was investigated with using the satellite images processing (TM). Base on the primary study, such as field survey, geophysical study, R.S.and petrography and mineralogy investigation the region was founded suitable place for resources of Copper (Cu) and Molybdenum (Mo). Kahang region is an alteration and breccia zone. In generally, more than %99 of rocks of this region are affected by hydrothermal fluids become in the low and high alteration degrees. The rocks of the area include Andesite, porphyritic andesite, Dacite, porphyritic rhyodasite, Diorite, Quartz monzonite and porphyry micro granite. In plutons, from rim to center of massive, is a trend from basic to acid features with less age.  For geochemical surveying, 174 soil samples in systematic method and 143 rock samples of the area have been collected. They are been analyzed for 45 elements using ICP – MS method in Amdel laboratory of Australia. After assurance of accuracy of the results, statistic parameters are calculated. Then correlation coefficient measures of data calculation using two and  multi variables analyze methods. Thus, based on mean measures and standard deviation of normalized data of elements, anomaly of locations is distinguished and they are presented as a table. At this stage for separation and identification of important anomalies using P.N. method. For introducing of the best locations for excavation and also study of geochemical behaviors of Cu and Mo, anomalous maps of 10 elements drown include of Cu, Mo, Au, Ag, Pb, Zn, As, Sb, Mn and Ba. The anomalous maps are drown in first step based on standard normalized duet and percent measures and in the second step with threshold limits plus amounts of standard deviation. Accordingly, it is delineate that the most concentration of hypogenous ores such as Cu and Mo in central part of area in Quartz monzonites and Diorites occurred, whereas the most concentration of supergeous ores such as Pb, Zn and Ag in the rim part of area in andesitic rocks occurred. Finally, for attainment of better results and recognition of anomalies correlated to ores, the composites haloes method is used and the map of composite haloes of supergene and hypogen ores are prepared based on standard normalized data. Solovov method is used for evaluation of erosion surface in ore area. On this base, if the amount of sum of standard normalized data of supergen ore to hypogens ratio is larger than one, we can conclude that the main ore bodies exist in the depth and it conserved from erosion processes. }, keywords = {Geochemical Investigation,Porphyry Copper and Molybdenum deposit,Composite Haloes,Kahang}, title_fa = {بررسی‌های ژئوشیمیایی در محدوده اکتشافی کهنگ}, abstract_fa = {محدوده اکتشافی کهنگ در 73 کیلومتری شمال خاوری اصفهان و 10 کیلومتری خاور شهرستان زفره قرار دارد. این اندیس معدنی بر روی کمربند آتشفشانی- نفوذی  ارومیه – دختر واقع شده و اولین بار بر اساس پردازش داده‌های ماهواره‌ای TM مورد شناسایی قرار گرفته است. بر اساس مطالعات اولیه، همچون بررسی‌های صحرایی، ژئوفیزیکی و دورسنجی و همچنین مطالعات سنگ‌شناسی و کانه‌نگاری، این منطقه از لحاظ وجود ذخیره مس و مولیبدن پورفیری مستعد شناخته شده است. محدوده کهنگ یک منطقه دگرسان و برشی شده است. به‌طوری که می‌توان گفت بیش از 90% سنگ‌های این محدوده تحت تأثیر سیالات گرمابی  به مقدار کم تا زیاد دگرسان شده‌اند. به نظر می‌رسد کانی‌سازی در منطقه تا حد زیادی توسط ساختارهای زمین‌ساختی کنترل می‌شود. سنگ‌های منطقه از نوع حد واسط تا اسیدی بوده به طوری که ، روند تغییرات از حاشیه به سمت قسمت‌های مرکزی  به سمت سنگ‌های اسیدی‌تر و جوان‌تر است. به منظور بررسی‌های ژئوشیمیایی در این محدوده 10 کیلومتر مربعی، 174 نمونه از خاک‌های منطقه به روش سیستماتیک و 143 نمونه سنگی از رخنمون‌های موجود در منطقه برداشت شده و تحت تجزیه شیمیایی 45 عنصری قرار گرفتند. پس از حصول اطمینان از دقت در نتایج تجزیه، اقدام به پردازش داده‌ها و محاسبه پارامترهای آماری شد . سپس به کمک روش‌های آماری دو متغیره و چند متغیره میزان همبستگی بین عناصر بررسی شدند. در مرحله بعد، برای بررسی رفتار ژئوشیمیایی عناصر مرتبط با مس و مولیبدن و تشخیص محدوده‌های بی‌هنجاری، نقشه‌هایی رسم شد. رسم نقشه‌ها در یک مرحله بر اساس داده‌های نرمال استاندارد و محاسبه درصدها و در مرحله بعد به روش حدآستانه‌ای به اضافه مقادیری از انحراف معیار صورت گرفت و مشخص شد که بیشترین تمرکز عناصر تحت کانساری مانند مس و مولیبدن در قسمت‌های مرکزی منطقه و در کوارتز‌مونزونیت‌ها و دیوریت‌ها صورت گرفته در صورتی که بیشترین میزان غلظت عناصر فوق کانساری همچون سرب،  روی و نقره در قسمت‌های حاشیه‌ای و در سنگ‌های آندزیتی منطقه اتفاق افتاده است. پس از آن برای تفکیک و تشخیص نا‌هنجاری‌‌های با اهمیت، از روش P.N  و برای تعیین بهترین مناطق، جهت عملیات حفاری و نیل به نتایج بهتر و دقیق‌تر، از روش هاله‌های مرکب استفاده شد. سپس برای ارزیابی سطح فرسایش در محدوده کانساری از روش سولووف استفاده شد و مشخص شد  که خوشبختانه کانسار در ژرفا قرار دارد و توسط فرسایش از بین نرفته است.   }, keywords_fa = {بررسی‌های ژئوشیمیایی,ذخیره پورفیری,هاله‌های مرکب,کهنگ}, url = {http://www.gsjournal.ir/article_57199.html}, eprint = {http://www.gsjournal.ir/article_57199_6c33804afbb2c6bf638e5446396e32d9.pdf} } @article { author = {Bahrami, H. and Uromiahy, A. and Ahmadi, M. and Soleymani, S.}, title = {Effect of Crashed Areola during Blast Advancing on 3dimention Numerical Analysis of Tunnel's Displacements "With Respect to 10th km of Gavooshan Tunnel"}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {19}, number = {73}, pages = {57-64}, year = {2009}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2010.57200}, abstract = {In a perfect design of underground spaces, amount of total displacement from the point of stability analysis is fundamental. In empirical and numerical stability analysis periphery of excavated area is consider as a continued mass. When an underground space is excavated by blasting process, so periphery of tunnel is damaged by that process. As a result, those materials are not continued. In this research this area named "Crashed areola". 3 dimensional distinct element methods has more adapted with this area, while compared to other numerical methods. 3DEC 4.0 which is based on this method was chosen as a numerical codes. 10th kilometers of Gavooshan tunnel which is water conveyance tunnel is considered as a case study. The part of this tunnel which studied in this research is surrounded by ophiolithic gabbro rock mass. For modeling of this tunnel two conditions were considered, first with continue media of rock mass and second discontinue media so called crash areola. One of the advantages of this part of tunnel is installation of instrumentation with very scientific methods and absence of lining in the other hand. The outputs of numerical solution were shown that modeling by considering crash areola is near to data collection by instrumentations.}, keywords = {Crashed areola,Blast advancing,Numerical modeling,3DEC,Gavooshan tunnel}, title_fa = {اثر هاله خرد شده در حفاری انفجاری بر تحلیل عددی سه-بعدی تغییرشکل‌های تونل با نگرشی ویژه بر کیلومتر 10 تونل گاوشان}, abstract_fa = {بررسی پایداری فضاهای زیر­زمینی پیش از حفاری و با توجه به میزان تغییرشکل‌های نهایی، از ملزومات طراحی است. در مدل‌سازی‌های مختلف یا تحلیل‌های تجربی، محدوده اطراف بخش حفر شده به شکل یک پارچه به‌صورت محیط پیوسته یا ناپیوسته، مدل و تحلیل می­شود. به نظر می­رسد در حفاری انفجاری به علت تخریبی که بسته به نوع انفجار، جنس توده سنگ و غیره رخ خواهد داد، ناحیه پیرامونی یکپارچه نباشد. در این تحقیق، ناحیه­ای تخریب یافته به نام "هاله خرد شده" در اطراف تونل در نظر گرفته ­شد تا مدل‌سازی در دو حالت یک‌پارچه (بدون وجود هاله خردشده) و بار دیگر با اعمال هاله خرد شده در اطراف آن انجام شود. روش المان مجزای سه بعدی که نسبت به دیگر روش‌های عددی، از همخوانی بیشتری با محیط ناپیوسته توده سنگ برخوردار است، انتخاب و با استفاده از نرم افزار 3DEC 4.0، به مدل‌سازی تغییرات ناشی از پیشروی پرداخته شد. مطالعه موردی تونل گاوشان که در حدود کیلومتر 10 از دهانه ورودی در گابروهای سری افیولیتی با پارامترهای مقاومتی به نسبت خوب حفر شده، انجام شد. شرایط مناسب نصب ابزار دقیق و از سویی عدم اجرای پوشش بتنی در بخش یاد شده باعث ثبت بهینه رفتار طبیعی زمین در این ناحیه شده و کنترل دقیق‌تر نتایج را فراهم شده است. بررسی خروجی­ها حاکی از همخوانی بیشتر مدلی که اطراف آن هاله خرد شده اعمال شد با نتایج ابزاردقیق است.}, keywords_fa = {هاله خرد شده,حفاری انفجاری,تحلیل عددی,3DEC,تونل گاوشان}, url = {http://www.gsjournal.ir/article_57200.html}, eprint = {http://www.gsjournal.ir/article_57200_863541b91c9cd6fe9eab62e17b0e3f9e.pdf} } @article { author = {Khoshbakht, F. and Memarian, H. and Mohammadnia, M.}, title = {Comparing Fractures in a Unique Structural Setting of an Oilfield, Acquired from FMI}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {19}, number = {73}, pages = {65-70}, year = {2009}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2010.57201}, abstract = {Natural fractures are the main factor which control hydraulic behavior of oil and gas reservoir in naturaly fractured reservoirs. Thus it is important to fully characterize these features in fractured reservoirs. Image logs are one of powerful tools in fracture study in wells. ‎Image log is high resolution “pseudo picture” of borehole wall which records properties of fractures. In present study, FMI (Formation Micro Scanner) of two wells located in the same structural setting of a naturally fractured carbonate are considered. Well A and B drilled through three formations (Asmari, Pabdeh and Gurpi) and fracture data of these formations were acquired from these wells. Both wells located in the same structural setting near each other. We compared fractures of each formation in well A with well B to find out similarity and dissimilarity of fractures occurd in the same formation in different wells. This study shows that density and orientation of bedding planes of well A is completely similar to well B. Density of open fractures of well A is totally different from well B but orientations of open fractures are same in two wells. Density and orientation of filled fractures of well A are similar to well B. Pattern of fractures of Asmari and Pabdeh formations are similar but in Gurpi fractures are different. Comparison of density of bedding planes and fractures show that high fracture frequency occurred in the thin beds, for example FMI show that laminar intervals of Pabdeh coincide with highly fractured intervals. }, keywords = {Image Log,Open and Filled Fracture,Orientation,Density of fracture,Formation}, title_fa = {مقایسه شکستگی‌ها در یک موقعیت ساختاری یکسان در یک میدان نفتی، با استفاده از لاگِ تصویری}, abstract_fa = {شکستگی‌های طبیعی از مهم‌ترین عوامل تعیین کننده رفتار هیدرولیکی مخازن نفت و گاز هستند. شناخت صحیح این شکستگی‌ها در برنامه‌های تولید و توسعه میادین نفت حائز اهمیت است. کارآمدترین ابزار برای مطالعه ویژگی‌های شکستگی‌ها، لاگ‌های تصویری هستند که تصویری با قدرت تفکیک بالا از دیواره چاه برداشت می‌کنند. این لاگ‌ها امکان تعیین نوع، جهت‌یابی، بازشدگی و ژرفای دقیق شکستگی‌ها را فراهم می‌کنند. در این مطالعه شکستگی‌های استخراج شده از لاگ‌های تصویری(FMI)  دو چاه واقع در یک میدان کربناته در جنوب باختر ایران مورد تحلیل آماری قرار گرفته است. این دو چاه در موقعیت ساختاری یکسان (یال جنوب باختری میدان) و نزدیک همدیگر واقع شده‌اند. در این مطالعه با مقایسه شکستگی‌های موجود در سازندهای یکسان در دو چاه مجاور، تشابه‌ها و تفاوت‌های شکستگی‌های سیستماتیک بررسی شده است و سعی شده است به این سؤال پاسخ داده شود که آیا شکستگی‌های یک سازند که از دو چاه واقع در یک موقعیت ساختاری یکسان برداشت شده‌اند، مشابه هستند یا خیر؟ مطالعه حاضر نشان داد که مرز لایه‌بندی مشاهده شده در لاگ‌های تصویری چاه A و B از نظر چگالی و جهت‌یابی به طور کامل مشابه هستند. چگالی شکستگی‌های باز در چاه A به طور کامل متفاوت از چاه B بوده ولی جهت‌یابی آنها به نسبت مشابه است و در نهایت چگالی و جهت‌یابی شکستگی‌های پرشده در هر دو چاه مشابه یکدیگر هستند. الگوی شکستگی در سازند آسماری و پابده کم و بیش مشابه بوده در حالی‌ که وضعیت شکستگی‌ها در سازند گورپی که در ژرفای بیشتری قرار دارد، به طور کامل متفاوت از این دو سازند است. مقایسه لاگ‌های چگالی مرز لایه‌بندی و شکستگی‌ها نشان داد که زون‌های با چگالی بالای شکستگی در قسمت‌هایی از سازندها قرار دارد که ستبرای لایه‌بندی در آنها کم است مانند سازند پابده که در این میدان به طور کامل لایه‌ای (لامینار) است.}, keywords_fa = {لاگ تصویری,شکستگی باز و پرشده,جهت‌گیری,چگالی شکستگی,سازند}, url = {http://www.gsjournal.ir/article_57201.html}, eprint = {http://www.gsjournal.ir/article_57201_d9fe97c2789fe4041b1abdee89fd0d96.pdf} } @article { author = {Rezaei, F. and Eivazi, M.}, title = {Investigation of Plate Bearing and Settlement in South-Eastern and East Tehran}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {19}, number = {73}, pages = {71-78}, year = {2009}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2010.57202}, abstract = {The Tehran city, capital of Iran is located on young alluvium deposits which mostly cover due to rapid urban development. This urban development without proper geotechnical and geological assessment may cause great engineering and economic problems. Survey of geotechnical problems are one of the most important issue that consider for building important structures. Most of constructions are based on the ground. Hence the Examination and recognition of physical and mechanical properties of soil layers are so necessary. Present research aims to determine stability parameters, plat bearing and amount of foundation settlement in East and South-Eastern of Tehran in Ghalemorghi area.  For this specific  zones have been identified, among them, first, second and third zones have middle (2