Sedimentology
Afshin Karimkhani-Bahador; Sadat Feiznia; Mohsen Aleali; Mehran Arian
Abstract
To prepare sedimentological data, 98 surface sampling stations have been designed from the seabed in the continental shelf in the southern part of the Caspian Sea and along the coast of Iran. Indicators such as the type and amount of sediment load transported to the sedimentation environment, the energy ...
Read More
To prepare sedimentological data, 98 surface sampling stations have been designed from the seabed in the continental shelf in the southern part of the Caspian Sea and along the coast of Iran. Indicators such as the type and amount of sediment load transported to the sedimentation environment, the energy of waves and sea currents, as well as how the slope of the seabed changes, play a role in the production and diversity of the sedimentary facies. 9 sedimentary facies are the most abundant in the surface deposits of this area and on average, in the sediments of the continental shelf, there are 1% by weight of coarse-grained particles, 25% by weight of medium-grained particles and 74% by weight of fine-grained particles. The composition of sedimentary facies in this area is controlled by indicators such as the size of sedimentary particles, the amount of sedimentary load carried to the environment, the energy of waves and sea currents, and how the slope of the seabed changes. In the marine environment of the study area, sub-sedimentary environments, Backshore, Foreshore, Shoreface, Offshore transition zone and offshore can be identified. The two facies of slightly gravelly Mud and Mud are more abundant than other facies.
Enayatallah Haghfarshi; Peyman Rezaee; Seyed Reza Moosavi Harami; Mohammad Faridi
Abstract
Lignite Beds of Tabriz are among of the Neogene formations in the northwestern area of the Iran, which is spread in the eastern suburb of Tabriz. Its sedimentary facies includes facies groups of fine grains clastics, sandstones, limestones and facies of lignite, tuff and microfacies and petrofacies under ...
Read More
Lignite Beds of Tabriz are among of the Neogene formations in the northwestern area of the Iran, which is spread in the eastern suburb of Tabriz. Its sedimentary facies includes facies groups of fine grains clastics, sandstones, limestones and facies of lignite, tuff and microfacies and petrofacies under them. In this study, two stratigraphic sections of these sediments in the eastern part of Tabriz were studied and 171 samples and 42 thin sections were collected and studied. XRD analysis for mineralogy and SEM electron microscopy for 3-dimensional studies were used to identify microfossils. Identified fossils include the genera and species of gastropods, Pelecypods, ostracods, fish, diatoms, charophyte algae, and foraminifera. The studied fossil assemblages includes species from freshwater to euryhaline and marine. The identified sedimentary environments include the lake basin environment, the shallow coastal environment and the marshy lake environment. In the studied sedimentary strata, strong fossil evidence and sedimentological evidence of the marine environment are not observed, at least during its lifetime. Therefore, it is concluded that the marine taxis in these deposits remain and are adapted from a former marine environment.
Petroleum geology
Majid Safaei Farouji; Hosein Rahimpour- bonab; Mohammadreza Kamali; Buyuk Ghorbani
Abstract
Geochemical investigation of Kazhdumi and Pabdeh formations suggest a shaly and carbonate lithology as well as a suboxic-anoxic marine depositional environment for both formations. On the other hand, the thermal maturity of the Kazhdumi Formation is equivalent to the mid of oil window while thermal maturity-related ...
Read More
Geochemical investigation of Kazhdumi and Pabdeh formations suggest a shaly and carbonate lithology as well as a suboxic-anoxic marine depositional environment for both formations. On the other hand, the thermal maturity of the Kazhdumi Formation is equivalent to the mid of oil window while thermal maturity-related parameters show that the Pabdeh Formation has not entered the oil window. Biomarkers are indicative of derivation of the four oil samples from a carbonate-shaly or marly source rock. Also, thermal maturity-related biomarkers reflect a peak mature stage for all of the four samples. Different values of oleanane index in oil samples is implying a more significant role of the Pabdeh Formation in hydrocarbon embedded in 36, 56, 55 wells in compare to well number 22. In general, oil-source correlation introduces both Kazhdumi and Pabdeh formations as source rocks for the crude oils.
Sedimentology
keyvan ahzan; Nader Kohansal Ghadimvand; Seyed Mohsen Aleali; Davood Jahani
Abstract
The Jahrum Formation (Paleocene-Mid Eocene) is one of the most important reservoir units in the Zagros basin and the Persian Gulf. The thickness of this formation in Binaloud oil field in Persian Gulf, which mainly consists of limestones and Dolomites, is about 660 meters. In this research, depositional ...
Read More
The Jahrum Formation (Paleocene-Mid Eocene) is one of the most important reservoir units in the Zagros basin and the Persian Gulf. The thickness of this formation in Binaloud oil field in Persian Gulf, which mainly consists of limestones and Dolomites, is about 660 meters. In this research, depositional environment, sequence stratigraphy and effective diagenesis processes on Reservoir quality of the Jahrum Formation were investigated in Binaloud oil field. The Jahrum succession, which consists of crystalline limestones and dolomites, is overlain by the Asmari Formation and is underlian by the Tarbur Formation unconformably. According to study of cutting samples, eleven microfacies that were deposited in four facies belts, have determined . The most important diagenetic process that was observed in this formation as follows: bioturbation, cementation, dolomitization, dissolution, porosity generation and fracture systems wich is worthy to mation bioturbation and anhydrite cement causes the reduce of reservoir quality and dolomitization , dissolution and secondary porosity causes the reservoir quality. improvement most of facies jahrum formation are mud supported and have very low primary porosity. According to sequence stratigraphy studies, a third order sedimentary sequence with type SB1 boundary was identified in Jahrum subsurface succession.
Stratigraphy and Palaeontology
Mahnaz Parvaneh Nejad Shirazi; M. Seddighi; P. Balicheh khorram abadi
Abstract
This study deals with lithostratigraphy, biostratigraphy, microfacies analysis, and depositional setting of the Jahrum Formation in Chellehgah Sepidan section, NW Shiraz. Vertical changes in lithological characteristics led to recognition of 15 lithotypes. The Jahrum Formation, in this area, rests conformably ...
Read More
This study deals with lithostratigraphy, biostratigraphy, microfacies analysis, and depositional setting of the Jahrum Formation in Chellehgah Sepidan section, NW Shiraz. Vertical changes in lithological characteristics led to recognition of 15 lithotypes. The Jahrum Formation, in this area, rests conformably (with a gradational boundary) on the Pabdeh Formation and is overlain unconformably by the Asmari Formation. Micropaleontological analyses based on benthic foraminifera (Nummulites striatus, N. cf. fabianii, N. gr. bullatus-garganicus, Spiroclypeus sp.) suggest a middle-upper Eocene age for the formation. Facies analyses allowed to recognize the 6 facies (including 12 microfacies) for the examined strata. The results also suggest that the Jahrum Formation deposited in a homoclinal ramp.
Sedimentology
Umid Kakemem; Mohammad Adabi; Ehsan Dehyadegari
Abstract
Depositional texture, sedimentary structure and present fauna led to characterize twelve carbonate- evaporate facies. These facies were classified in three facies belts including tidal flat, lagoon and shoal. Developpment of tidal zones together with evaporate deposits and thrombolite facies (signs to ...
Read More
Depositional texture, sedimentary structure and present fauna led to characterize twelve carbonate- evaporate facies. These facies were classified in three facies belts including tidal flat, lagoon and shoal. Developpment of tidal zones together with evaporate deposits and thrombolite facies (signs to a shallow depositional environment), the absence of continuous reef‐frame builders, high production of carbonate mud, absents of calciturbidite, tempestites deposits and slump structures are evidences for a homoclinal carbonate ramp setting. The facies based on petrophysical characteristics which is the results of depositional texture and diagenesis are classified in seven reservoir rock types. In which, the first rock type (RT1) has weak reservoir property and toward RT7 reservoir quality will increase. Facies variation related to sea level fluctuations led to subdivide the whole strata into two 3rd order sequences. Facies stacking patterns in the sequences characterized by subtidal facies (lagoon and shoal) tend to have the most reservoir quality that covered by evaporative (Mf1) and peritidal facies (Mf2 to Mf4) with low-reservoir quality. The most reservoir quality in both K1 and K2 reservoir zones is coincident with late TST, maximum flooding surface (mfs) and late HST in identified depositional sequences which is settled in high-energy shoal facies intervals.
Sedimentology
Yazdan Golestan; Umid Kakemem; Mohammad Adabi; E. Dehyadegari
Abstract
Carbonate-evaporate succession with siliciclastic sediments and mixed siliciclastic carbonate deposits of Asmari-Pabdeh reservoir in Karanj Oil Field with Oligo-Miocene in age was studied to determine diagenesis, microfacies and original carbonate mineralogy. Micritization, dissolution, compaction, neomorphism, ...
Read More
Carbonate-evaporate succession with siliciclastic sediments and mixed siliciclastic carbonate deposits of Asmari-Pabdeh reservoir in Karanj Oil Field with Oligo-Miocene in age was studied to determine diagenesis, microfacies and original carbonate mineralogy. Micritization, dissolution, compaction, neomorphism, cementation and dolomitization are the main diagenesis processes that effect Asmari-Pabdeh successions. Petrographic studies led to identification of three types of dolomite such as dolomicrite, dolomicrosparite and dolosparite, in which dolomicrosparite and particulary dolospatite caused increase in reservoir quality. Eleven carbonate-evaporate microfacies were identified. These deposited in four major environments comprises of tidal flat, lagoon, carbonate shoal and open marine. Sedimentary environment of the Asmari Formation recognized as a homoclinal ramp. Diagenetic studies reveal impact of marine, meteoric and burial diagenesis on the deposits. Geochemistry of minor and major elements reveal original aragonite mineralogy for carbonates of the Asmari Formation. The high Sr/Mn and Sr/Ca and minor amounts of manganese implying close diagenetic system with low Water/Rock interaction for the Asmari Formation succession.
M. H. Kazemzadeh; A. Sadeghi; M. H. Adabi; H. Ghalavand
Abstract
In order to determine biostratigraphy, depositional environment and sequence stratigraphy of the Kalat Formation in the Sheikh Syncline (north east of Bojnurd), Four stratigraphic sections including South Sheikh, North Sheikh, Qaleh Zu and Ziarat were selected and sampled. The thickness of the Kalat ...
Read More
In order to determine biostratigraphy, depositional environment and sequence stratigraphy of the Kalat Formation in the Sheikh Syncline (north east of Bojnurd), Four stratigraphic sections including South Sheikh, North Sheikh, Qaleh Zu and Ziarat were selected and sampled. The thickness of the Kalat Formation in the South Sheikh, North Sheikh, Qaleh Zu and Ziarat sections were 25, 16, 25 and 5m respectively, and its lithology consists mainly of brown to yellow limestones. The reason of changes in thickness in studied sections is tectonic factors, subsidence and different rates of sedimentation. The layer of conglomerate in the base part of the Kalat Formation at South Sheikh and Qaleh Zu sections and the layer of sandstone in the base part of the Kalat Formation at Ziarat section were recognized. In the biostratigraphic studies, 15 species belonging 23 genera of foraminifera were recognized and one biozone including Siderolites calcitrapoides-Sirtina orbitoidiformis assemblagezone was identified. The age of the Kalat Formation in all of studied sections based on the above biozone and fossil contents Maastrichtian were determined. Petrographic analysis led to recognition two silliciclastic and eight carbonate facies belonging to four depositional environments including tidal flat, restricted and semi-restricted lagoon, shoal and open marine. Based on the recognized facies and its gradual trend, abundance of shoal facies, absence of reefs and sediment of turbidite flows such as Falling and sliding sediments, the sedimentation of the Kalat Formation was occurred on the homoclinal ramp setting. Based on the vertical changes of facies and recognized depositional environments, one third-order depositional sequences was represented. This depositional sequence consists mainly of shoal facies rich in bioclast, intraclast, benthic foraminifera, echinoid, rudist (Hyporite) and bivalve. MFS of this sequence is represented by open marine facies rich in echinoid.
H. Hoseini; N. Kohansal Ghadimvad; M. Zamani Pedram; M. R. Majidifard; A. R. Shahidi
Abstract
Accumulation of Shemshak group lithofacies have been started during Early-Cimmerian orogeny from middle of Late-Triassic and ended with Middle- Cimmerian discontinuity dating Millde-Jurrasic. So the mostly Siliciclastic and occasionally Marin lithostratigraphic unite has evidences of two major tectonic ...
Read More
Accumulation of Shemshak group lithofacies have been started during Early-Cimmerian orogeny from middle of Late-Triassic and ended with Middle- Cimmerian discontinuity dating Millde-Jurrasic. So the mostly Siliciclastic and occasionally Marin lithostratigraphic unite has evidences of two major tectonic events as orogenic activity at lower and upper border of sequence. Therefor the lower contact of Shemshak group is composed of Middle-Triassic platform carbonates known as Elika formation which distinguished with Plaeokarsts including bauxit and laterit horizons and the upper contact with parallel unconformity with Delichay formation fossiliferous marls and carbonates of Bajocian stage (Middle Jurrasic). Results of deposition environment and facies studies have shown that the mentioned siliciclastic group (Shemshak) composed of three major facies, 22 subfacies and have been deposited in three different environments including Fluvial (Terrestrial), mid-tidal and shallow marine environments. The vertical changes of facies have declared that the sequence has formed due to erosion of Early-Cimmerian uplands and have experienced progess of shallow marine. The existing shallow marine sediments in the end of Shemshak group states that, in comparison with surrounding area , clastic sediments of end of Shemshak cycle, because of erosional cycles of Middle-Cimmerian orogeny, befor deposition of Delichay marine formation, have been eroded.
Sedimentology
Afshin Zohdi
Abstract
In this study, for the first time stratigraphy and depositional history of the Routeh Formation have been evaluated in west of Zanjan (Agh-Bolagh section). These deposits with thickness of 102m consist of limestone, dolomitic limestone with the less frequency of thin-bedded calcareous shales. This sedimentary ...
Read More
In this study, for the first time stratigraphy and depositional history of the Routeh Formation have been evaluated in west of Zanjan (Agh-Bolagh section). These deposits with thickness of 102m consist of limestone, dolomitic limestone with the less frequency of thin-bedded calcareous shales. This sedimentary sequence with an unconformity overlies the quartz-bearing sandstones of Doroud Formation and is overlain by a laterite-bauxite horizon below the vermiculate-bearing limestone of Elika Formation. The main components of Routeh Formation contain different kinds of algae, small benthic foraminifera and with a less frequency echinoderm and brachiopod debris. Based on filed and laboratory studied eight sedimentary facies have been distinguished into the Routeh Formation. These facies due to the different types of allochems, texture and fossil content display a shallow-water marine environment during deposition of the Routeh Formation located at Palaeotethys passive southern margin. The absence of re-sedimented deposits like: turbidites, presence of micrite at the most of facies, lack of continues reefal facies and gradual facies change indicate that the Routeh Formation possibly were deposited in a ramp carbonate platform. Due to great diversity and abundance of algae and benthic foraminifera, this carbonate ramp is referred to as an “algae and foram-dominated carbonate ramp system”. Field observations, facies analyses and sequence stratigraphy studied led to the identification of one-third order depositional sequence into the Routeh Formation. This depositional sequence separated by type-1 sequence boundaries at below with quartz-bearing sandstones of Doroud Formation and at the top with laterite-bauxite horizon between Routeh and Elika formations
Stratigraphy and Palaeontology
Somayeh Baharlouei Yancheshmeh; Ebrahim Ghasemi Nejad; Hossain Rahimpour-Bonab; Seyyed Ali Aghanabati
Abstract
Permo- Triassic subsurface section at Lavan 3 Well in Lavan Gas Field exhibits a 85 m-thick succession of limy dolostone and dolomitic limestone bearing anhydrite in the upper Dalan Formation, as well as a 154 m-thick succession of limy dolostone and dolostone with anhydrite ...
Read More
Permo- Triassic subsurface section at Lavan 3 Well in Lavan Gas Field exhibits a 85 m-thick succession of limy dolostone and dolomitic limestone bearing anhydrite in the upper Dalan Formation, as well as a 154 m-thick succession of limy dolostone and dolostone with anhydrite intercalations in Kangan Formation. In the present study, 116 species belonging to 55 foraminifera genera were identified which were divided into two biozones, namely Charliella altineri- Paraglobivalvulina mira- Dagmarita chanackchiensis Assemblage zone (Dzhulfian in age) and Claraia aurita- Spirorbis phlyctaena Assemblage zone (Anisian in age). Nine primary microfacies were identified in the upper Dalan Formation, while, 13 microfacies were detected in Kangan Formation, together with different sub-environments (sabkha, tidal flat, lagoon, submarine ridge, and open marine) which were found to be deposited in a shallow marine carbonate platform in the form of a homoclinal ramp. Based on microfacies changes, aggradational, progradational and retrogradational stacking patterns of deposits and by conformation with the Gama-ray log, these strata could be divided into a couple of third-order sedimentary sequences for the upper Dalan Formation, as well as a couple of third-orders for the Kangan Formation, including two system tracts (TST and HST). On a global scale, the findings are comparable to the upper part of the Absaroka supersequence.
Z. Alishavandi; H. Rahimpour-Bonab; A. Kadkhodaei; M. Arian
Abstract
The Sarvak Formation deposited in the North to Northeastern margin of the Arabian Platform during the Mid-Cretaceous (Albian-Turonian), and is extensively encountered in the Folded Zagros of southwestern Iran. It is the most important reservoir unit after Asmari Formation in Iran. Petrography of microscopic ...
Read More
The Sarvak Formation deposited in the North to Northeastern margin of the Arabian Platform during the Mid-Cretaceous (Albian-Turonian), and is extensively encountered in the Folded Zagros of southwestern Iran. It is the most important reservoir unit after Asmari Formation in Iran. Petrography of microscopic thin sections in studied wells led to determination of nine microfacies that deposited in 3 sub-environments; restricted lagoon, lagoon-open marine and shoal in an interior part of carbonate ramp. Petrographic studies revealed that since deposition, the Sarvak Formation experienced several diagenetic realms including marine, meteoric, burial and telogenetic diagenetic environments. Location of the studied wells shows that the relative depth of the Sarvak Formation ramp decreases from the east to the west. Also, the results show that the Sarvak reservoir quality affected by various diagenetic processes such as micritization, dissolution, dolomitization, cementation, stilolitization and fracturing. These diagenetic successions are mainly restricted to the upper and lower parts of the Cenomanian-Turonian disconformity. Meteoric water infiltration below this disconform boundary and related karstification led to development of moldic and vuggy porosity a long with reservoir quality increase. Based on the sequence stratigraphic study, three third-order sequences were recognized in the middle Cenomanian to middle Turonian part of the formation. The results of this research show that the reservoir quality distribution in this unit is primarily controlled by depositional facies so that the rudist microfacies (grainstone, floatstones and rudstones) have the best primary reservoir qualities though, it has also been drastically improved by dissolution in paleoexposure surface
R Farokhnejad; B Esfandiari; A Motamed
Abstract
In this paper the Fajan Formation of Paleocene age with a thickness of 172.5 meters is studied in northwest Shahroud (Eastern Alborz). Main lithology of this formation, at the studied section, consists of conglomerate and sandstone. The formation disconforably overlain upper Cretaceous limestones ...
Read More
In this paper the Fajan Formation of Paleocene age with a thickness of 172.5 meters is studied in northwest Shahroud (Eastern Alborz). Main lithology of this formation, at the studied section, consists of conglomerate and sandstone. The formation disconforably overlain upper Cretaceous limestones and its upper boundry with Ziarat limestone of Eocene age is of transitional type. Dominant lithology of mentioned formation, at the studied section, consists of polymodal and polymictic orthoconglomerate which contains rounded to subrounded grains. These clastic grains are generally oval to spherical in shape and originated from limestone, sandstone and chert materials. Paleocene Conglomerate is characterized by two distinc lithofacies: clast-supported massive gravel (Gcm) and clast-supported horizontally stratified gravel (Gh) which are formed in a braided river system. This subject is interpreted by evidances as condensed texture gravels, imbrication fabric that indicate on one hand paleocurrent, non-existence of fossil by reason of oxidation conditions of sedimentary environment, sandstone lenses that have through cross bedding (St) and existence of gravels that are mostly rounded to subrounded and denote distance from origin. Abundant bed load mostly rang in size from pebble to cobble and partially boulder, gravelly beds with long extended lateral spread and lack of flood plain muddy sediments, are reasons in distinguish between recognized sedimentary environment and meandering river. The studied Sandstone layers are described by ripple marked sand (Sr) and planar-cross-bedded sand (Sp) which contain sublitharenite and quartzarenite type are deposited in tide-dominated deltaic system.Interpretation criteria are propounded by means of interference ripple mark that prove direction change of current bearing clastic particles, rounded to subrounded sands that can present repeated reworking of grains after deposition in sedimentary environment, well sorting, high textural maturity, insignificant matrix as criterion in distinction specified delta from other deltaic environments and herringbone cross bedding which is the most important evidence of tidal currents.
L. Azad Shahraki; H. Rahimpour Bonab; M. Ranjbaran; A. Kangazian
Abstract
The Lower Cretaceous (Neocomian) carbonates of the Fahliyan Formation are considered as important reservoir rocks in the Zagros Basin. In this study, the sedimentary successions of this formation in Lar (620m thick) and Khami (517m thick) anticlines, located in the Izeh zone, were investigated to analyze ...
Read More
The Lower Cretaceous (Neocomian) carbonates of the Fahliyan Formation are considered as important reservoir rocks in the Zagros Basin. In this study, the sedimentary successions of this formation in Lar (620m thick) and Khami (517m thick) anticlines, located in the Izeh zone, were investigated to analyze microfacies, depositional environment, and diagenetic phenomena. Based on petrographic studies, 16 microfacies related to five facies belts of tidal flat, lagoon, carbonate shoal, mid ramp and outer ramp were recognized. Grainstone microfacies were found more abundant in the Lar stratigraphic section than the Khami section. Lack of turbidite deposits and reefal facies, and transitional changing of the facies show that the Fahliyan Formation was deposited in a homoclinal carbonate ramp. Abundance of mud dominated facies and rarity of high energy facies (like shoal facies) show that the ramp was a leeward one. According to petrographic studies, the main diagenetic features of the carbonates were micritization, cementation, dissolution, neomorphism, compaction, fracturing, and dolomitization. Due to deposition in the photic zone and high sedimentation rate, the thickness of the Fahliyan Formation in both stratigraphic sections is considerable, but based on the drawn isopach map, the thickest succession of the formation is found in the Lar section. Therefore, the Lar area is considered as the depocenter of the Fahliyan Formation. Difference in the thickness of the Fahliyan successions of Lar and Khami, most probably, is caused by the syndepositional activity of the north-south trending basement faults (like Kazeroon fault) in the region. Also, difference in the quantity of the burial compaction of the carbonate successions (caused by facies and diagenetic differences) played a role in secondary (burial) thickness changes.
R. Haftlang; M. Afghah; S. A. Aghanabati; M. Parvaneh Nezhad Shirazi
Abstract
Lithological and biological Sequences of Cretaceous in Bahar section, Located in South Esfahan (147 m. true thickness) include grayish olive green pencil- like shales containing Budantysras Ammonites (Albian) interbedded with limy shales. which are covered by glauconitic Sandy Limestone (Early Turonian) ...
Read More
Lithological and biological Sequences of Cretaceous in Bahar section, Located in South Esfahan (147 m. true thickness) include grayish olive green pencil- like shales containing Budantysras Ammonites (Albian) interbedded with limy shales. which are covered by glauconitic Sandy Limestone (Early Turonian) (with erosional discontinuity). These sandy limestones are wackestone and rarely greenstone, according to Dunham classification. Based on Biozone divisions, this unit is related to Biozone No. 27 presented by Wynd (1965) and it is equivalent to Sarvak Formation in Zagros. Marly limestone and limestone containing Inoceramus bivalve interbedded with marl dating back to Late, Middle Touronian- Late Touronian- Coniacian to Early Santonian are younger equivalents of this section which can be equaled to Surgah Formation. According to Biozone divisions, this unit is equivalent to Biozone No. 28 presented by Wynd (1965) and also based on Dunham classification, the unit is packestone and partly boundstone. The lower Contact of the unit is Concordant and Continuous with glauconitic sandy limestone and its upper Contact is Continuous and Concordant with marl and interbeddings of Limestones dating back to Santonian- Campanian. By comparing Bahar Section with South eastern Lorestan section (Poshte jangal anticline), (Azadbakht, 2015), the following results were obtained: From Litho/bio stratigraphical view, thick to thin-bedded Limestones (Light to dark gray) interbedded with marl in Poshte jangal anticline are Correlated with Inoceramus limestone and marly Limestone interbedded with marl in Bahar Section. They are dated back to EarlyTuronian to Early Campanian.Due to Strong similarity of Lithostratigraphy and biostratigraphy between Bahar section located in Southern Esfahan (Central Iran) and section of Poshte jangal anticline located in Southeast of Lorestan, it can be deducted that a branch of Lorestan Sea has advanced in Turonian- Coniacian times and some parts of Southern Esfahan has been covered by the sea.
Stratigraphy and Palaeontology
M. Allameh; A. Mahboubi; R. Moussavi-Harami; M. Khanehbad
Abstract
The Aitamir Formation (Albian-Cenomanian) composed of siliciclastic rocks and several carbonate horizons. In order to study depositional environment and sequence stratigraghy, two stratigraghic sections studied in east Koppeht Dagh basin near the Baghak and Shurijeh villages. Field and petrograghic studies ...
Read More
The Aitamir Formation (Albian-Cenomanian) composed of siliciclastic rocks and several carbonate horizons. In order to study depositional environment and sequence stratigraghy, two stratigraghic sections studied in east Koppeht Dagh basin near the Baghak and Shurijeh villages. Field and petrograghic studies led to siliciclastic and carbonate facies that deposited in lagoon, barrier, shoreface and open marine environments. Sequence stratigraghy analysis led to identification of three depositional sequences in both sections. Comparision of interpreted sea level curves at studied area with Albian-Cenomanian global curve shows similarities and differences that can be relatedto tectonic setting and sedimentation rate.
M Khazaee; M Hosseini-Barzi; A Sadeghi; H Mosaddegh
Abstract
The Jeirud Formation (Upper Devonian) in Deh-Sufian section of northeast of Shahmirzad consists of siliciclastic and carbonate deposits. In the study area lower boundary of the Jeirud Formation with fine grain clastic deposits of the Mila Formation is erosional (Disconform) and has been conformably overlain ...
Read More
The Jeirud Formation (Upper Devonian) in Deh-Sufian section of northeast of Shahmirzad consists of siliciclastic and carbonate deposits. In the study area lower boundary of the Jeirud Formation with fine grain clastic deposits of the Mila Formation is erosional (Disconform) and has been conformably overlain by dark carbonate deposits of the Mobarak Formation. The clastic deposits of the Jeirud Formation include conglomeratic, sandy and muddy facies. The conglomeratic deposits comprises three facies A1, A2 and A3 that are equivalent to Gcm, Gt and Gmm/Gmg of Miall facies respectively. Also, five sandy facies of B1, B2, B3 and B4 equivalent to St, Sh, Sm and Sr of Miall respectively and B5 (Shc) with hummocky cross stratification (HCS) sedimentary structure have been identified. Muddy facies including C1 and C2 are equivalents to Miall’s Fsm and Fl facies. Carbonate facies (D) comprising small amounts of the stratigraphic column is almost entirely dolomitized. Field and petrographic studies provide five facies association: fluvial, foreshore-backshore, shoreface, offshore transitional zone and offshore and carbonate facies interpreted as Proximal carbonate tempestites and distal carbonate tempestites based on evidences such as basal erosional surface, normal grading, HCS and coexisting clastic facies . In the study area, the Jeirud Formation deposits initiate with fluvial sequences that have been followed by storm dominated marine deposits as foreshore-backshore deposits and alternations of shoreface to offshore deposits. Study of sequence stratigraphic surfaces especially important subaerial unconformities and also stratal stacking patterns of the formation resulted in determination of three subaerial unconformity bounded depositional sequences plus transgressive part of the 4th sequence.
A Ramezani Akbari; H Rahimpor-Bonab; M.R Kamali; R Moussavi-Harami; A Kadkhodaie
Abstract
The Fahliyan Formation of Khami Group is hosting important hydrocarbon reserves in Iran and also is a main reservoir rock in the Abadan Plain oil fields which is Neocomian in age. In the studied wells its thickness is about 440 meters. In the Abadan Plain, the Fahliyan Formation transitionally overlies ...
Read More
The Fahliyan Formation of Khami Group is hosting important hydrocarbon reserves in Iran and also is a main reservoir rock in the Abadan Plain oil fields which is Neocomian in age. In the studied wells its thickness is about 440 meters. In the Abadan Plain, the Fahliyan Formation transitionally overlies the argillaceous limestone of the Garau Formation and its upper boundary changes into marl and argillaceous limestone of the Gadvan Formation. According to thin sections examinations prepared from cuttings and cores plus electrofacies analysis 11 microfacies and 2 lithofacies are recognized. This formation consists of two carbonate and mixed carbonate-siliciclastic (mixed zone) members. The Lower Fahliyan was deposited in carbonate ramp environment while, the Upper Fahliyan was deposited in a mixed carbonate–siliciclastic environment. To determine electrofacies, the rock types were modeled with using MRGC method. Best correlation between petrographical and electrofacies is 12 cluster model (in MRGC method). These results suggest that the electrofacies model is in agreement with heterogenetic rock type such as mixed carbonate–siliciclastic environment observed in petrography. Also, in homogenous rock type such as carbonate ramp environment electherofacies can’t completely determine geological facies. Based on petrographical and electrofacies this formation is composed of three third order sequences with type sb2 sequence boundaries. But, the third sequence in mixed carbonate–siliciclastic zone is terminated with sb1 sequence boundary just below the Gadvan Formation.
N Shahverdi; H Rahimpour- Bonab; M.R Kamali; B Esrafili- Dizagi
Abstract
The Albian-TuronianSarvak Formation is one of the main oil reservoirs in south and southwest Iran that hosts significant amount of hydrocarbon resources in this region. Facies analysis in seven oil fields of Persian Gulf led to identification of 7 microfaceis that are deposited in four facies belts in ...
Read More
The Albian-TuronianSarvak Formation is one of the main oil reservoirs in south and southwest Iran that hosts significant amount of hydrocarbon resources in this region. Facies analysis in seven oil fields of Persian Gulf led to identification of 7 microfaceis that are deposited in four facies belts in a homoclinal ramp platform. Studies show that there is major facies variation in Sarvak carbonates of offshore Zagros. The rudist-bearing facies are mainly developed as major reservoir facies in the eastern Persian Gulf (Siri Fields) and replaced with mud-dominated lagoonalfacies in central and western sectors of considered area (Hendijan, Bahregansar, Balal and Lavan Fields). There are positive correlation between paleogeographic position of rudist buildups and configuration of Sarvak reservoir in the Persian Gulf. Main diagenetic processes that effected facies of this formation are neomorphism, bioturbation, micritization, dolomitization, dissolution, cementation, stylolitization and fracturing. During diagenesis, rudist-dominated facies are selectively dissolved and led to development porosity and reservoir quality in the Siri Fields. Generally, diagenesis is slightly impacted reservoir properties in the central and western parts oil fields, although, dolomitization is improved reservoir characteristics in the Bahregansar Field. Petrophysical evolution of studied intervals suggests that good reservoir intervals are associated with rudist-bearing facies. As well, there are decreasing trend in both porosity and permeability values from top of formation downwards, particularly in Siri fields. This trend is attributed to effect of meteoric diagenetic under the Turonian unconformity. In conclusion, our studies indicate that occurrence and evolution of rudists had main impact on diagenetic modification and reservoir potential of Sarvak Formation.
N Kohansal-Ghadimvand; Sh Gholipouri; P Ghazanfari; R Mahari
Abstract
The aim of this study is to determine microfacies and diagenetic processes of the Mobarak Formation with the age of early Carboniferous in Valiabad section, at Karaj-Chalus road. The thickness of the formation at this section is 339 m and consists of limestone with intercalations of shale and marl. ...
Read More
The aim of this study is to determine microfacies and diagenetic processes of the Mobarak Formation with the age of early Carboniferous in Valiabad section, at Karaj-Chalus road. The thickness of the formation at this section is 339 m and consists of limestone with intercalations of shale and marl. According to lithological characteristics, the MobarakFormationis subdivided into 8 rock units and is disconformably overlain by the Lalun Formation and underlain by Dozdeband Formation. Thirteen microfacies have been recognized on the basis of depositional texture and petrographic analysis. These carbonate facies belong to four major sub- environments including beach/tidal flat, lagoon, barrier/sand shoal and open marine. The formation deposited in a homoclinal carbonate ramp.
A Abdi; M.H Mahmudy Gharaie; M Kariminia; A Karimi Bavandpur; M Mohajjel
Abstract
In Kermanshah Radiolarites, Jurassic to late Cretaceous in age, three sedimentary facies including tempestite, pelagic mudstone, and radiolarian wackestone-packstone were identified. Each of these sedimentary facies accompanies by ichnofacies, which reveal the depth and energy of the environment. In ...
Read More
In Kermanshah Radiolarites, Jurassic to late Cretaceous in age, three sedimentary facies including tempestite, pelagic mudstone, and radiolarian wackestone-packstone were identified. Each of these sedimentary facies accompanies by ichnofacies, which reveal the depth and energy of the environment. In the tempestites (including calclithite bed, flat pebble conglomerate and hummocky cross stratification) the trace fossils with Domichnia such as Thalassinoides can be observed, which indicate the energetic conditions at the time of sedimentation. Trace fossils found in pelagic limestone units have Pascichnia and Fodinichnia. These Trace fossils include Planolites, Chondrites and Helminthopsis, which indicate distal Cruziana ichnofacies and show low energy condition. As a result of increasing of depth in siliceous deposits, the trace fossils with Pascichnia and Chemichnia including Scolicia, Helminthopsis, Gyrochorte and Chondrites, and Thalassinoides become dominant, which are indicative of the transitional zone between the distal Cruziana ichnofacies and the Zoophycos ichnofacies. The sedimentary facies and the present ichnofacies are indicative of the sedimentation of these deposits in the transitional zone between the middle and the outer ramp.
J Rabbani; E Ghasemi-Nejad; A.R Ashouri; M Vahidinia
Abstract
The basal unit of the Pabdeh Formation at Bisheh-Deraz section composes of 47m purple to green to grey shale and marl. These beds gradually change to shale and argillaceous limestone in the top of the section. In order to study paleoecology and paleoenvironment of these beds, palynological evidences ...
Read More
The basal unit of the Pabdeh Formation at Bisheh-Deraz section composes of 47m purple to green to grey shale and marl. These beds gradually change to shale and argillaceous limestone in the top of the section. In order to study paleoecology and paleoenvironment of these beds, palynological evidences including palynofacies, abundance and diversity of dinocysts and environmental index have been investigated. Four Palynofacies types including IV: shelf to basin transition, VII-VIII: distal dysoxic-anoxic shelf, IX: distal suboxic-anoxic basin) have been differentiated that propose a distal suboxic-anoxic basin as depositional setting. According to the microfacies of planktonic foraminiferal Wakestone/Packestone a deep environment is proposed as the depositional basin. Using such parameters as palynofacies evidences, C/PPC ratio, AOM/MP ratio, abundance and diversity of dinocysts and environmental index, three system tracts related to one sequence (3rdorder) with one sequence boundary type 2 and one maximum flooding surface have been determined. In general, the factors all together show a deepening upward trend through this rock unit.
M Karavan; A Mahboubi; H Vaziri-Moghaddam; R Moussavi-Harami
Abstract
The Oligocene Qom Formation deposits in NW Central Iran (NE Delijan) are widespread in NE-SW trend.Four members of the Qom Formation (unknown, a, b& c1) in the study area consist of mainly marly limestone, limestone, sandy limestone and a minor amounts of sandstone. It disconformablyoverliesthe Lower ...
Read More
The Oligocene Qom Formation deposits in NW Central Iran (NE Delijan) are widespread in NE-SW trend.Four members of the Qom Formation (unknown, a, b& c1) in the study area consist of mainly marly limestone, limestone, sandy limestone and a minor amounts of sandstone. It disconformablyoverliesthe Lower Red Formation and the upper boundary is covered by the recent alluvium. Based on the benthic foraminifers assemblage, these deposits are attributed to Oligocene (Rupelian- Chattian). Petrographic considerationled to identification of 12 carbonatemicrofacies and one sandstone facies that may have been deposited in a homoclinal ramp and in 4 sub environments including tidal flat, lagoon, bioclastic bar and open marine. Sequence stratigraphy analysis led to identification of 8 3rdordersdepositional sequences bounded by type I and type II sequence boundaries. Comparison between interpreted relative sea level curve with global sea level curve showsreasonable correlation with the lower and upper sequence boundaries of this formation and also Rupelian- Chattianboundary and the differences in other sequence boundaries can be related to local tectonic activity in the sedimentary basin of Qom Formation and the local sea level changes.
M. Mehdinia; R. Moussavi Harami; D. Jahani
Abstract
The goal of this study is to use petrographic and other sedimentary features to interpret depositional environment of Faraghan Formation (Lower Permian) in one of the wells in Golshan Field. Golshan Gas Field is located at about 180 km South East of Bushehr between South Pars and North Pars and Ferdowsi ...
Read More
The goal of this study is to use petrographic and other sedimentary features to interpret depositional environment of Faraghan Formation (Lower Permian) in one of the wells in Golshan Field. Golshan Gas Field is located at about 180 km South East of Bushehr between South Pars and North Pars and Ferdowsi Fields. In this study, 130 thin sections of cuttings have been studied, and 8 petrofacies and 3 microfacies and 2 hybrid arenite fasies were identified in the well. Textural maturity of sediments, such as well- sorted and rounded quartz grains, show that the Faraghan Formation was deposited in coastal and shallow marine environments. The identified Facies has been deposited in sabkha, estuarine, foreshore, shoreface and offshore subenvironments.
S. Parham; M. R. Kamali; F. Fayazi
Abstract
The Dalan Formation (Upper Permian) is mainly composed of limestone and dolostone with minor evaporite interbeds. Upper carbonates of the Dalan Formation constitute one of the main gas reservoirs in the Zagros fold thrust belt especially in the Fars and the Persian Gulf. The upper part of the Dalan Formation ...
Read More
The Dalan Formation (Upper Permian) is mainly composed of limestone and dolostone with minor evaporite interbeds. Upper carbonates of the Dalan Formation constitute one of the main gas reservoirs in the Zagros fold thrust belt especially in the Fars and the Persian Gulf. The upper part of the Dalan Formation consists of oolitic grainstone with high reservoir quality. Based on sedimentological studies in the upper Dalan unit, seven microfacies have been recognized. This microfacies have been deposited in warm, arid intertidal, lagoon and shoal. They deposited in a homoclinal ramp. Different diagenetic process affected this unit are bioturbation, micritization, neomorphism, replacement, dolomitization, anhydritization, mechanical and chemical compaction, cementation, dissolution and fracturing. Based on the evidence like widespread dissolution, formation of moldic and vuggy porosity and precipitation of different types of meteoric cements and based on paragenetic sequences, it can be concluded that the studied interval, have not buried after the deposition, but at least some parts like oolitic shoal exposed subearially and was affected by meteoric diagenesis that was followed by deep burial diagenetic environment.
